Ricerca

Menu

Promozioni

  • Termocamere Serie P3

    Acquista una delle termocamere della serie P3 e potrai avere una lente in omaggio. Le termocamere interessate sono le Ti27, TiR27, Ti29, TiR29, Ti32 e TiR32.

  • PROMO FLUKE

    Chiedi informazioni sulla pagina delle PROMOZIONI FLUKE in corso

  • Pinze 374 e 375

    Acquista una pinza Fluke 374 o 375 ed avrai in omaggio una iFlex™ che potrai richiedere direttamente dal sito FLUKE

  • Pinze 376 e 381

    Acquista una pinza Fluke 376 or 381 ed avrai in omaggio una custodia per il trasporto che potrai richiedere direttamente dal sito FLUKE

  • TI400 TI300 TI200

    Fluke presenta le nuove ed uniche termocamere dotate di autofocus LaserSharp™ per immagini sempre nitide ed a fuoco! Il nuovo sistema laser di messa ha una precisione estrema che nessun è in grado di offrire. L'oggetto da ispezionare viene messo a fuoco immediatamente con una visualizzazione e risoluzione ottimale. "Punta e scatta" sicuro d'essere a fuoco ogni singola volta

  • Tester per batterie Fluke BT521

    Con il nuovo tester per batterie Fluke BT521 è ora più facile che mai gestire sistemi di backup a batterie nei data center, nelle reti di telecomunicazioni e nei sistemi di distribuzione dell'alimentazione elettrica.

    • PIÙ TEST IN UNA SOLA VOLTA
    • MENO TEMPO
    • ANALISI DEI DATI AVANZATA
    • FLUSSO DI LAVORO SEMPLIFICATO

    Il nuovo analizzatore di batterie Fluke BT521 è lo strumento di misura ideale per la manutenzione, la ricerca guasti e i test sulle prestazioni delle singole batterie stazionarie e dei banchi batterie utilizzati in applicazioni critiche di backup.

  • VT04

    Fluke VT04 termometro ad infrarossi con schermo per visualizzazione termografica dotati di una fotocamera digitale integrata che consente la sovrapposizione di immagini termiche e visive nitide per diagnosticare i problemi nel minimo dettaglio.

  • PROMO MSOX/DSOX4000A

  • Unità di rilavorazione WXR 3

    La nuova unità di rilavorazione/riparazione multifunzionale a 3 canali compatibile alla famiglia WX.

    Per maggiori informazioni sul prodotto consultare la sezione NEWS del nostro portale.

  • Offerta esclusiva con l'acquisto di una termocamera FLUKE

    Fluke offre GRATIS un Apple® Ipad® con l’acquisto di una termocamera* FLUKE.

    Ottieni il meglio delle termo immagini con la App Fluke Connect e l’Apple® Ipad® ed il software SmartView® mobile.

    Con Fluke Connect condividi i dati ed immagini con il tuo team ovunque tu sia e senza lasciare il campo.

    Richiedici maggiori informazioni.

  • LA-150 DC €15.000,00

    The Lab Assistant LA-150 DC probing system.   It is a simple yet stable and sturdy probing platform for 6" (150 mm) and smaller wafers, fragments or packages.   The LA 200 is ideal for Universities and R & D Centers where applications dictate that each researcher has their own station, that the station be small enough to fit on a desk or small work bench, the station be easy to set up and use, and the cost of the complete station is reasonable.  Includes prober, microscope and 2 -MA-8000 coaxial manipulators with magnetic base.  USER INSTALLED

    Per configurazioni di probe station semiautomatiche e automatiche, contattateci sul nostro sito web

  • RF BROADBAND BI DIRECTIONAL COUPLER

    RF Broadband bidirectional coupler - range da 0,01 MHz a 2 GHz. Per maggiori informazioni sulle caratteristiche del prodotto consultare il link sottostante.

  • LOW NOISE BROADBAND AMPLIFIER MODULE

    Low Noise Broadband Amplifier Module - amplifier range da 0,1 MHz a 2,6 GHz. Per maggiori informazioni sulle caratteristiche del prodotto consultare il link sottostante.

  • AC Power Sources

    Chroma designs and manufactures five families of leading edge programmable AC power sources, precision power supplies, frequency converters and related instrumentation for simulating AC mains and line fault simulations conditions. Our AC Power Sources are used in automatic testing equipment and bench top applications including avionics testing, IEC testing, Mil-std-704 Avionics, DO-160 Shipboard testing and power supply test applications.

  • Programmable DC Power Supplies

    Our programmable DC Power Supplies are commonly used in automated testing systems and bench top applications for DC-DC converters, Telecom, Battery charge and simulation, Automotive, Solar panel simulation, Burn-in, and plating/electrolysis applications. These variable DC Power Supplies range from 600W to 5000W. Constant power operating envelope, current range up to 160A and high precision current read back make these power sources ideal for automatic test system applications as well as benchtop applications.

  • EasyTrack2

    Excellent for quick, accurate and economical temperature profiling, this temperature monitoring system features the EasyTrack® data logger, thermal barrier and thermocouples, as well as temperature profiling software.EasyTrack2 provides up to 6000 data points per channel for detailed thermal profiles. Its single page standard report is excellent for ISO 9000 validation and traceability of powder coating processes. In addition, EasyTrack2 can be used in high temperature PTFE Dacromet cure andwrinkle-free garment cure applications.For detailed information, visit the website below.

  • Broadband and Wireless RF Power Amplifier

    This solid state power amplifier is designed for realiable, trouble-free service.It operates in class A and includes RF protection circuits, fan cooling, and a 230 V AC power supply. The amplifier is accommodated in a 19" system housing. Per maggiori informazioni sul prodotto, consultare il link sottostante.

  • RF Power Amplifier module - Broadcast TV,OFDM,HDTV Power amplifier

    This solid state power amplifier is designed for realiable,trouble-free service.It operate in a class A/AB so as a 12 V DC power supply. The amplifier is accommodated in aluminium housing. Per maggiori informazioni sul prodotto, consultare il link sottostante.

  • Model 35

    The Picoprobe Model 35 has been engineered to meet the stringent demands of advanced high frequency circuit designers. This probe combines full DC capability, rise/fall times of 14 ps, and a nominal loading input impedance of 1.25 megohms shunted by 0.05 pf. Signal attenuation is 10:1 with a 50 ohm oscilloscope input. Like our other active probes, the Model 35 achieves its bandwidth using just one probe point, which greatly simplifies internal node testing without sacrificing performance. An assortment of user replaceable probe tips are available for a variety of probing needs. The Model 35 is powered by our new PS-3 power supply

  • Picoprobe Model 7 and Model 7A

    PICOPROBE® MODEL 7 was designed as a companion probe to Models 12C and 18C for driving integrated circuit lines so the Model 12C and 18C can be used to measure the response of adjacent nodes. The Model 7 consists of a flexible 6 foot, 50 ohm coaxial cable accurately terminated to 50 ohms in order to avoid undesirable reflections. A special miniature connector receives replacement coaxial probe tips that provide a shielded environment to within 3 mm of the fine tungsten probe point, thus minimizing capacitive coupling to other parts of the circuit. The replaceable coaxial probe tips are offered in various point sizes and can also be bent to any shape in order to accommodate a variety of probing geometries. PICOPROBE® MODEL 7A, an unterminated version, can be used for capacitance and resistance measurements or in low to medium speed signal applications where a 50 ohm termination is not required. A flexible coaxial cable length of 6 feet in length is standard on the Model 7A; however, when used for capacitance measurements, GGB Industries, Inc., recommends using a shorter 3 foot cable. If a shorter length of cable is desired for capacitance measurements, please specify it when ordering (Model 7A-3ft.). Please note that Model 7A uses Model 7 replacement tips. http://www.ggb.com/PdfIndex_files/mod7.pdf

  • Picoprobe by GGB Industries

    Distek è da oggi Distributore GGB Industries Picoprobe, azienda leader mondiale per la produzione di sonde ad alta frequenza, microwave di precisione e manipulators per probestation, in grado di risolvere problematiche di alta impedenza per studi diagnostici del funzionamento di chips complessi, oltre che risolvere esigenze on-wafer probing nel settore dei semiconduttori.

  • Model 34A

    The PICOPROBE® MODEL 34A was engineered to meet the stringent demands of advanced high frequency circuit designers. This high impedance probe combines full DC capability, rise/fall times of 120 ps, and a nominal loading input impedance of 10 megohm shunted by 0.1 pf. Signal attenuation is 20:1 with a 50 ohm oscilloscope input. Like our other active probes, the Model 34A achieves its bandwidth using just one probe point, which greatly simplifies internal node testing without sacrificing performance. An assortment of user replaceable probe tips are available for a variety of probing needs. The Model 34A is powered by our standard Picoprobe® power supply.

  • Model 10

    PICOPROBE® MODEL 10 is a multipurpose, high speed, passive probe which can be used for driving as well as receiving signals. The Model 10 consists of a one meter length of flexible 50 ohm coaxial cable terminated by a carefully trimmed SMA on one end and by a miniature, high speed 50 ohm connector, specially developed to receive Model 10 replaceable coaxial probe tips, on the other. The 50 ohm coaxial cable was custom designed for Model 10 to be high speed, yet very flexible, so that moving the cable would not disturb the probe points.
    Adaptable for a wide range of applications, the Model 10 uses a variety of special purpose, easily replaceable probe tips. Each probe tip consists of a 1.5 inch long 50 ohm semi-rigid coaxial line, a retaining nut, one or two probe points, and a variety of electrical components tailored to achieve the desired electrical characteristics. To drive or receive signals on 50 ohm circuit points, the Model 10 should be fitted with a probe tip that has two probe points, one for the ground and one for the signal. Probe points which extend 0.120 inches beyond the 50ohm coaxial probe tip have been designed for dc to 3.5 GHz response and probe points which extend 0.030 inches beyond the probe tip have been designed for dc to 7 GHz response. The longer 0.120 inch tips are more flexible, making them more durable and easier to use than the shorter 0.030 inch style.

  • Model 40A

    The GGB Industries, Inc., MODEL 40A microwave probe sets new standards in microwave probing performance. Using low loss coaxial techniques, the Model 40A achieves an insertion loss of less than 0.8 db and a return loss of greater than 18 db through 40 GHz.

  • Model 40M Low Loss Picoprobe

    MODEL 40A PICOPROBE®. This probe is recommended for certain types of load pull and noise parameter measurements when even our standard, super low, 0.75 db insertion loss (typical at 40 GHz) is too high. We also offer low loss probes in DC to 50GHz and DC to 67GHz. 

  • Model 50A

    The GGB Industries, Inc., MODEL 50A probe sets new standards in microwave probing performance. Using low loss coaxial techniques, the Model 50A achieves an insertion loss of less than 1.0 db and a return loss of greater than 18 db through 50 GHz.With its individually spring loaded, Beryllium-Copper or optional tungsten tips, the Model 50A provides reliable contacts, even when probing non-planar structures. This reliable low resistance contact is one of the keys to providing highly repeatable measurements. The Model 50A also provides direct viewing of the probe tips for accurate positioning.The Model 50A can be mounted in various adaptors (see below) for use with standard microwave probe stations. Custom mounts are available as well.Any pitch (tip spacing) from 25 to 1250 microns may be specified. The probe can be configured with Ground-Signal-Ground (G,S,G), Ground-Signal (G,S), or Signal-Ground (S,G) tip footprints.Connection to the Model 50A is through a female 2.4mm connector which is also compatible with the V connector. 

  • Model 67A

    A coplanar probe with patented flexible tips, the MODEL 67A microwave probe sets new standards in microwave probing performance. Using low loss coaxial techniques, the Model 67A achieves an insertion loss of less than 1.1 db and a return loss of greater than 14 db through 67 GHz.With its individually spring loaded, Beryllium-Copper or optional Tungsten tips, the Picoprobe® Model 67A microwave probe provides reliable contacts, even when probing non-planar structures. This reliable low resistance contact is one of the keys to providing highly repeatable measurements. The Model 67A also provides direct viewing of the probe tips for accurate positioning.The Model 67A can be mounted in various adaptors for use with standard microwave probe stations. Custom mounts are available.Any pitch (tip spacing) from 25 to 1250 microns may be specified. The probe can be configured with Ground-Signal-Ground (G,S,G), Ground-Signal (G,S), or Signal-Ground (S,G) tip footprints. We recommend smaller pitches with a G,S,G footprint for best results.

  • Model 110H

    The PICOPROBE® MODEL 110H is a high performance microwave probe which incorporates our patented coaxial design techniques and has inherent low loss and low dispersion characteristics. Like all of our Picoprobe microwave probes, the Model 110H has customer-preferred features such as: individually spring loaded Beryllium-Copper tips which provide reliable contacts even when probing non-planar structures; direct viewing of probe tips for accurate positioning; and can be designed to almost any pitch and footprint. Smaller pitches and Ground-Signal-Ground footprints are recommended for optimum performance. Connection to the Model 110H is via a female 1.0 mm connector. Please contact our office for additional information regarding the performance specifications of the Model 110H Picoprobe.

  • Model 50

    The MODEL 50 PICOPROBE® sets new standards in microwave probing performance. Benefiting from coaxial techniques, which have inherent low loss and low dispersion characteristics, the Model 50 Picoprobe®, with or without the bias T option, achieves an insertion loss of less than 0.8 db (typical) and a return loss of greater than 15 db (max.) over its frequency range. With its individually spring loaded, Beryllium-Copper tips, the Model 50 Picoprobe® provides reliable contacts, even when probing non-planar structures. This reliable low resistance contact is one of the keys to providing highly repeatable measurements (-55 db) at V band frequencies. The Model 50 Picoprobe® also provides direct viewing of the probe tips for accurate positioning. Any pitch (tip spacing) from 50 microns and up may be specified. The probe can be configured with Ground-Signal-Ground (G,S,G), Ground-Signal (G,S), or Signal-Ground (S,G) tip footprints. We recommend smaller pitches with a G,S,G footprint for best performance.

  • Model 75

    The MODEL 75 PICOPROBE® sets new standards in microwave probing performance. Benefiting from coaxial techniques, which have inherent low loss and low dispersion characteristics, the Model 75 Picoprobe, with or without the bias T option, achieves an insertion loss of less than 1.0 db (typical) and a return loss of greater than 15 db (max.) over its frequency range.With its individually spring loaded, Beryllium-Copper tips, the Model 75 Picoprobe® provides reliable contacts, even when probing non-planar structures. This reliable low resistance contact is one of the keys to providing highly repeatable measurements (-50 db) at V band frequencies. The Model 75 Picoprobe also provides direct viewing of the probe tips for accurate positioning.Any pitch (tip spacing) from 50 microns and up may be specified. The probe can be configured with Ground-Signal-Ground (G,S,G), Ground-Signal (G,S), or Signal-Ground (S,G) tip footprints. We recommend smaller pitches with a G,S,G footprint for best performance. Most customers are using GSG probes with a pitch of 100 to 250 microns.

  • Tungsten Probe Tips T-4 Series

    T-4 tips are for use in most standard commercial micropositioners for probing integrated circuits, pads, or lines. Each T-4 tip uses the same 10, 22, 35, 60, or 125 micron diameter tungsten wire as our Model 12C Picoprobe, but is mounted to a 0.020 inch diameter, 2 inch long tinned copper shaft.
    An advantage of the 10 and 22 micron models pointed out by some of our users is that because the tungsten probing wire is thin and flexible it minimizes damage to the integrated circuit and allows them to probe the device for a much longer period of time. The flexibleT-4 tip remains in contact with the circuit even in the presence of probe table vibrations.
    T-4 tips are not recommended for use on sensitive nodes where capacitance loading could be a problem. Instead, one of our high impedance Picoprobes should be used. If you would like T-4 samples, please contact our office.

  • The new Picotest PDN Probes

    Two new types of PROBES have been introduced: The Picotest PDN Probes. These new probes makes impedance and step load measurements EASY. These PROBES are expected to be a particularly hot item, as there really isn’t anything quite like them on the market. They greatly enhance the capabilities of the Bode 100 VNA. Their small size really eases measurement especially in tight places. Their technology enables more accurate impedance measurements. Please let us know if you have any questions. All the informations are available in the link below.

  • Lite Kit

    The basics: A pen, an LED module and some batteries! The Lite Kit has everything you need to get started with Circuit Scribe. It comes with one Conductive Ink Pen, one LED module, and two coin cell batteries. Find a magnetic surface - like a whiteboard or your refrigerator - and start making electronic sketches. € 30,00

  • Basic Kit

    Create circuits with our most fundamental component modules. The Basic Kit comes with our most fundamental components, but you can use them to create some cool circuits! Connect the LEDs in parallel or series, use capacitors to fade them on and off, or make a paper touch sensor with the NPN transistor. Kit comes with a Conductive Ink Pen. € 65,00

  • Basic Kit + Book

    A set of our most fumdamental modules plus our education workbook. In addition to the Conductive Ink Pen and Basic Kit modules, you'll also get a workbook filled with lessons and circuit templates that you can draw over. € 80,00

  • Maker Kit

    Basic Kit with additional sensors and output modules The Maker Kit will get you working with more advanced output components and sensors. Add sound to your circuits using the Buzzer, fade between colors on the RGB LED using the Potentiometer, or control your outputs with light using the Photosensor. Kit comes with a Conductive Ink Pen. € 110,00

  • Developer Kit

    A plethora of modules: our largest kit for paper electronics developers The Developer Kit is our largest set of components. It’s perfect for a large-scale electronic drawing with multiple sensors and outputs or for someone who wants to create new applications for conductive ink. It combines two sets of components from the Basic and Maker Kits plus the hardware connection kit and DIY boards. € 250,00

  • DC Electronic Loads

    Chroma is the global leader in DC Electronic Load manufacturing. Used for power testing in all markets including automatic test systems, LED, power supply testing, battery testing, fuel cell testing, Chroma's electronic loads come standard with either USB or RS232 control and can be configured for GPIB (IEEE-488) control as well.

  • RF Fiberoptic Link

    This RF fiberoptic link is designed for remote RF signal in a wide range of frequency between 500 Hz to 500MHz. Per maggiori informazioni sulle caratteristiche del prodotto consultare il link sottostante.

  • AC Electronic Loads

    Chroma's AC Electronic Loads are designed for testing uninterruptible power supplies(UPS), Off-Grid Inverters, AC sources and other power devices such as switches, circuit breakers, fuses and connectors.

  • Oven Tracker XL2

    Datapaq® offers the Oven Tracker® XL2 System, the latest generation of Oven Tracker systems for robust, comprehensive, intelligent and easy-to-use oven temperature profiling.For detailed information, visit the website below.

  • Furnace Tracker

    Datapaq® Furnace Tracker® Systems offer accurate and reliable in-process temperature surveying for various types of heat treating applications in the aluminum, steel, glass, forging and aerospace industries. To meet very specific system requirements, the Furnace Tracker System can be assembled from a selection of data loggers, protective thermal barriers and thermocouples, and completed with Insight profiling software for data storage and analysis.For detailed information, visit the link below.

  • Reflow Tracker Systems

    The Datapaq Reflow Tracker® System sets the industry standard for ease-of-use and reliability in thermal profiling. This rugged and reliable, yet lightweight system, is ideal for the following list of applications in electronics assembly and manufacturing: - Reflow - Wave Solder - Vapor Phase - Tack/Cure - Conformal Coating

  • SolarPaq Profiling System for CiGs Panel Coating

    The Datapaq® SolarPaq system has been designed specifically to monitor the temperature of the glass substrate as it passes through the vacuum coating process. The profiling system passes through the multi-chamber process, measuring the temperature profile from up to 4 positions on the glass; even with the plasma activated. This feature, combined with the unique reflective plate thermal barrier enables the system to be used without disrupting normal production flow.Monitoring this deposition process is key to optimizing it. Due to the nature of the processing equipment, this process was until now, very difficult and costly to measure. Now, for the first time, there is a system that can pass through the process and obtain full product temperature profiles.For detailed information and system specifications, visit the link below.

  • SolarPaq Profiling System for Anti-reflection Coating

    Datapaq® SolarPaq temperature profiling system for anti-reflection coating has been designed to monitor the product temperature profile as the photovoltaic (PV) cells pass through the plasma coating process. This system consists of Insight software, Q18 data logger, stainless steel thermal barrier and ultra fine type K thermocouples.Based on our research with the major equipment manufacturers, this profiling system has been designed to pass through the process chambers and measure the cell temperatures even with the plasma activated. This feature combined with the unique ability to be slotted straight into a unmodified cell carrier, enables temperature profiling to be conducted without disrupting normal production flow.For detailed information and system specifications, visit the link below.

  • Food Tracker System

    The Datapaq® Food Tracker® temperature profiling systems are comprised of a data logger, a protective thermal barrier and Insight software. With a Datapaq system, you can guarantee the quality and safety of your cooked meats, poultry, bakery products and ready-to-eat meals.Datapaq systems, designed to withstand the harshest environments, travel through the oven or freezer with the food product, making a complete record of product temperatures. You can monitor the product temperature for the entire cook/freeze cycle in either static or conveyorized ovens, as well as in steam cookers, deep fat fryers and blast freezers. For detailed information and system specifications, visit the link below.

  • Datapaq

    For Industrial Temperature Profiling please visit the link below, and for further informations please do not hesitate to contact DISTEK Strumenti e Misure Srl.

  • FLIR Promo

    Acquista una termocamera FLIR inclusa in questa promozione e avrai in regalo un dispositivo di imaging termico FLIR ONE per il tuo iPhone 5/5s! (Dal 15 Ottobre 2014 al 31 Dicembre 2014) Compila il modulo cliccando sul link sottostante.

  • Testec

  • Precision power amplifiers - 4-quadrant voltage amplifiers - A1230-01

    A 1230-01 4-quadrant voltage amplifier DC-7 MHz | 380 V/µs | 185 W (source) | 68 W (sink) - Broadband lab amplifier for ohmic and complex loads; - Ideally suitable as downstream equipment for function generators; - Addition of two inputs with 50 O and 100 kO input resistance, respectively, is possible; - A preamplifier output (Bridge out) allows for simple bridge circuit structures; - Full remote control possible through USB port 2 supply voltages.

  • PRECISION POWER AMPLIFIERS - 4-QUADRANT VOLTAGE AMPLIFIERS - A 1110-05

    A 1110-05 4-quadrant voltage amplifier DC-1 MHz | 100 V/µs | 500 W (source) | 90 W (sink) - Fully configurable and operable by means of the supplied software; - Symmetrical input; - series / parallel connection in case of higher voltage / current requirements; - USB port as series; - 2 supply voltages.

  • PRECISION POWER AMPLIFIERS - 4-QUADRANT VOLTAGE AMPLIFIERS - A 1110-16

    A 1110-16 4-quadrant voltage amplifier DC-1 MHz | 100 V/µs | 1000 W (source) | 250 W (sink) - Fully configurable and operable by means of the supplied software; - Symmetrical input; - Series / parallel connection in case of higher voltage / current requirements; - USB port as series (LAN interface optional); - 2 supply voltages

  • Precision power amplifiers - 4-quadrant voltage and current amplifiers A 1110-05-E

    A 1110-05-E 4-quadrant voltage and current amplifier DC-1 MHz | 100 V/µs | 500 W (source) | 150 W (sink) - Fully configurable and operable by means of the supplied software; - Symmetrical input; - Series / parallel connection in case of higher voltage / current requirements; - USB port as series (LAN interface optional); - 3 supply voltages; - Monitor output voltage / current; - 6 configurable compensation networks for inductive loads in the current amplifier operating mode

  • PRECISION POWER AMPLIFIERS - 4-QUADRANT VOLTAGE AMPLIFIERS - A 1110-16-E

    A 1110-16-E 4-quadrant voltage and current amplifier DC-1 MHz | 100 V/µs | 1000 W (source) | 340 W (sink) Fully configurable and operable by means of the supplied software Symmetrical input; Series / parallel connection in case of higher voltage / current requirements; USB port as series (LAN interface optional); 3 supply voltages; Monitor output voltage / current; 6 configurable compensation networks for inductive loads in the current amplifier operating mode

  • Isolation Amplifiers A 1340-C1

    A 1340-C1 Isolation amplifier DC-1.7 MHz | 20 V/µs | IMRR > 106 dB |500 VAC, 1 kVDC 3-port isolation amplifier (input, output, USB/network) with optionally selectable input and output potentials Input instrument amplifier with high-power common-mode suppression and switchable gain of 1, 2, 5 or 10 Purely analog signal transmission, i.e. output signal free from switching signals Automatic offset compensation is possible at any time at the push of a button

  • AirRobot AR100C

    The AR100-C is the latest development within the AR100 series of flight platforms, adapting all the features from the AR100-B the AR100-C consists of enhanced features including AirRobots unique folding system and a multitude of specialized protective cases and our own on the move backpack making transportation hassle free. The Payloads for the AR100-B can be quickly attached to the AR100-C using AirRobots unique connectors making it easy to continue with the operation and resulting in minimal downtime. Variety of Payloads available including thermal and infra red cameras. The flight time under normal weather conditions is 25 minutes. The AR100-C is ideal for close up inspection applications as it measures at 1 meter in diameter enabling closer observation. We offer rotor blade protection brackets that shield contact with walls and objects.

  • Broadband high-frequency amplifier A1020-25-250

    A 1020-25-250 Broadband high-frequency amplifier 150 kHz - 250 MHz | 25 W Broadband high-frequency amplifier for EMC testing and general laboratory applications; Low-noise operation through high-performance heat sink with temperature-controlled fan; Micro-processor control of all relevant amplifier data; Monitor output.

  • OFFERTA SPECIALE - ATTENUATORE NARDA 745-69

    OFFERTA SPECIALE - ATTENUATORE NARDA 745-69 DC to 18 Ghz € 1790,00 COMPLETO DI 1 ANNO DI GARANZIA

  • AirRobot AR180

    The AR-180 is one of the most universal flight platforms available covering virtually all applications with high performance. Ranging within the 5kg weight class (excluding payload) and adapting fully stabilized HD payloads the AR180 has a flight time of 40 minutes enabling expansion of aerial operations and greater operational control. Complete with reinforced transport cases and a new folding system integrated into the UAS the AR180 can be deployed rapidly and transported safely and securely. The latest development of the AR180 enhances all aspects of operations making operations hassle free and majorly reducing deployment time of the AR180 even further. The ground control station is built into the hand controller with a whole new integrated on screen interface that is user friendly and suits operational needs. Within the interface way points can be plotted and changed in-flight via touch, maps of locations can be downloaded and all data is shown on screen. Simply all the equipment the pilot will need for an operation is the hand controller,battery,payload and flight platform.

  • AirRobot AR200

    The AR200 is the most powerful flight platform in the AirRobot series. With a take-off mass of 10kg (excluding payload)the AR200 is capable of lifting up to a 1.5kg payload and a flight time of 40 minutes.Using the 6 brush-less motor concept the AR200 is able to withstand higher wind speeds with minimal effect on stability. Variety of payloads are available including a brand new development soon to be released into the market. Measuring at 2 meters the AR200 can be transported with ease using the AirRobot unique folding system and specialized cases.

  • Ground control station AR126-41

    AR ground control station (BKS2), digital Incl. digital video recorder, onscreen display, power management, video adapter cable, low voltage cable, (exclusive transmitter and receiver, to be ordered separately) Digital recording in MP4-format on an USB-stick or secondary USB-data carrier device, USB-connector for PC Radio-free connection through a fibre optic cable is available Possible operating time > 5h with one rechargeable-battery

  • AirRobot Base Station T-BKS

    The Base Station is the point of interaction between the mobile units and the human operator. On-screen display and live video image via AirRobot Mission Manager software. More details in the link above.

  • Camera Payload AR180-30

    Camera Payload AR180 / AR200 NL-BL Sony CX410; Recording in AVCHD format („MTS“) on SD data carrier; Resolution: 1,920 x 1,080 Pix (Full HD); 30 x optical zoom

  • Handcontroller TFT-SLR AR126-13

    Handcontroller TFT-SLR. Discription: High-resolution 6,4” (16,25cm) TFT-SLR (sunlight-readable) monitor with dimmable backlight; Live-video and On-screen display (OSD); Propulsion, nick, roll and yaw on two independend Joysticks; Controlling of the payload and waypoints over keypad; For simple using even in the total darkness (red keyboard illumination).

  • Payload Slots for AR150 Block Cameras

    AR180 NL-BL 3 times slot. Slots for up to 3 block cameras of the AR150 payload series

  • SM6000 - Series 6000 W DC Power Supplies

    Features Designed for long life at full power Excellent dynamic responses to load changes Protected against all overload and short circuit conditions Master / Slave parallel and series operation with voltage and current sharing High power system configuration from multiple units 19” rack mounting or laboratory use (feet included) Remote sensing Interlock

  • SM3300 - Series 3300 W DC Power Supplies

    The latest high performance programmable DC power supply from Delta Electronika is able to be operated on single and three phase power sources and is ideally suited to the following applications: Solar inverter testing, PV-simulation Automotive test systems and battery simulations ATE in industrial production lines Plasma chambers and laser applications Controlled battery charging and discharging Driving PWM-controlled DC motors Aerospace and military equipment The Delta SM 3300-Series 3300W programmable DC power supplies are designed for long life at full power. They have excellent dynamic response to load changes and protected against all overload and short circuit conditions.EMC surpasses all CE requirements with low emission & high immunity. They offer low audible noise and the fan is temperature controlled. High voltage isolation up to 1320V

  • SM1500 - Series 1500 W DC Power Supplies

    Delta Elektronika SM1500 Series DC Power Supplies are ideally suited for bench or rack mount applications.The Delta Elektronika SM1500 Series 1500W programmable DC power supplies are designed for long life at full power. They have excellent dynamic response to load changes and protected against all overload and short circuit conditions. EMC surpasses CE requirements: low emission & high immunity. They offer low audible noise: fan is temperature controlled. Available options include High Speed Programming, Extra Isolation, Interface Options, Sequencer, Digital Encoders, Power Sink.

  • SM3000 - Series 3000 W DC Power Supplies

    The Delta Elektronika SM3000 Series Laboratory Power Supply, 19"-rack and bench power supplies. Very high performance, low noise both electrical and audible. The Delta SM 3000-Series 3000W programmable DC power supplies are designed for long life at full power.This high quality power supply is protected against all overload and short circuit conditions Very stable voltage or current 4.10-5 - 10.10-5 EMC: class B for Generic Emission. Can be used safely near sensitive equipment Accurate voltage and current control by 10 turn potentiometers Programmable by Analog voltage, Isolated analog, Ethernet, RS232 or IEEE488 CE High Speed Programming versions available.

  • SM800 - Series 800 W DC Power Supply

    800 W laboratory, bench power supplies, some with two output autoadjusted ranges. The outputs are very stable and accurate and settings can be made either manually of by digital control. The potentiometers can be digital decoders. Very low noise, electrically but also audible. Many features including build-in data interfaces Ethernet, RS232, GPIB, IEEE488. Replaces SM7020D and SM3004D

  • ES 300 Series 300 watts DC Prower Supplies

    The ES300 is a 300 watt DC power source. Voltage ranges are programmable from 0 to 30 volts. Current is programmable from 0 amps to 10 amps.

  • ES 150 Series 150 watts DC Prower Supplies

    Delta Elektonika ES - Series 150W Bench, Programmable System DC power supply Models includeES015-10 0 - 15 V 0 - 10 A ES030-5 0 - 30 V 0 - 5 A ES075-2 0 - 75 V 0 - 2 A ES0300-0.45 0 - 300 V 0 - 450 mA.

  • EST 150 - Series 150W triple output DC Prower Supply

    Compact Triple Output Bench Power Supplies Very low ripple Active Power Factor Control Accurate voltage and current control by 10 turn potentiometers Protected against all overload and short circuit conditions CE

  • MEGOHMMETER M1501P

    Analog or digital solutions, this Insulation Tester is our hi-tech range for cable manufacturers and industry. Product details : insulation and ammeter measurement; temperature and humidity measurement (option); resistance measurement per km for cable testing; Measurement storage - up to 512 measurements can be stored into internal memory (option); reversible polarity; dedicated for laboratory, cable tester manufacturers, SIR (Surface Insulation Resistance) test can be done through ISOSCAN software coupled with a switching matrix; IEEE488-2 model

  • MEGOHMMETER M1501M

    Our digital Insulation Tester is our hi-tech range for cable manufacturers and industry. Product details : insulation and ammeter measurement; temperature and humidity measurement (option); resistance measurement per km for measuring cables on reel; Measurement storage - up to 512 measurements can be stored into internal memory (option); reversible polarity; dedicated for laboratory, cable tester manufacturers; SIR (Surface Insulation Resistance) test can be done through ISOSCAN software coupled with a switching matrix

  • MEGOHMMETER M1501U

    Our digital Insulation Tester is our hi-tech range for cable manufacturers and industry. This U version, is a derivated product from the M1500M, but much cheaper (with limited specs). Product details: insulation and ammeter measurement; temperature and humidity measurement (option); resistance measurement per km for measuring cables on reel ; reversible polarity; dedicated for laboratory, cable tester manufacturers;SIR (Surface Insulation Resistance) test can be done through ISOSCAN software coupled with a switching matrix

  • MEGOHMMETER MXS1000

    The MXS1000 is a megohmmeter / teraohmmeter with a high accuracy, dedicated as well for test laboratories as for production line thanks to his ethernet interfaces and fast communication. Product details : Insulation resistance from 50kO up to 200 GO (2 TO in option); DC voltage up to 1000 VDC (1 V steps); 50 parameter sets storage; Built in RS232C interface and good/bad contact; ETHERNET, PLC or IEEE488-2 interfaces in option; SXSPro software available in english, french, spanish and german ? resistance measurement per km for test on cables (option XS-22); dedicated for laboratory and production lines; complies with the following safety testing standards : IEC1010, IEC335, IEC598, IEC601, IEC950, and many other standards

  • MEGOHMMETER MXS500

    The MXS500 is a megohmmeter / teraohmmeter with a high accuracy, dedicated as well for test laboratories as for production line thanks to his ethernet interfaces and fast communication Product details: Insulation resistance from 50kO up to 200 GO (2 TO in option); DC voltage from 10 V up to 500 VDC (1 V steps); 50 parameter sets storage; Built in RS232C interface and good/bad contact; ETHERNET, PLC or IEEE488-2 interfaces in option; SXSPro software available in english, french, spanish and german resistance measurement per km for test on cables (option XS-22); dedicated for laboratory and production lines; complies with the following safety testing standards : IEC1010, IEC335, IEC598, IEC601, IEC950, and many other standards

  • Synor Cable Tester Range

    SYNOR CABLE TESTER RANGE IS AN ATE (AUTOMATIC TEST EQUIPMENT) DEDICATED FOR TESTING ELECTRICAL WIRING HARNESSES, BACKPLANES OR CABLES

  • Safety Cage

    A SAFETY CAGE IS NECESSARY WHEN YOU WANT TO REALIZE DIELECTRIC STRENGTH TEST ON SMALL SUB-ASSEMBLIES WITH THE HIGHEST LEVEL OF SAFETY. ASSOCIATE OUR SAFETY CAGES WITH OUR DIELECTRIC STRENGTH TESTER, DIELECTRIMETER OR MEGOHMMETER IN ORDER TO REALIZE YOUR TEST AND PREVENT THE USER FROM HIGH VOLTAGE DANGERS

  • Switching Matrix

    A SWITCHING MATRIX IS A SCANNER (RELAYS) DEDICATED TO AUTOMATE A TEST PROCESS. IT ALLOWS YOU TO AUTOMATICALLY TEST SEVERAL PRODUCTS AT THE SAME TIME, OR SEVERAL POINTS OF A DEVICE UNDER TEST. OUR MATRIXES ARE ORGANIZED INTO MODULES (MODULO 4) IN ORDER TO GIVE YOU A GREAT FLEXIBILITY. EITHER YOU CAN DRIVE OUR SYSTEM OR OUR SOFTWARE SOLUTION CAN. APPLICATION WHEN SEVERAL HIGH VOLTAGE OR GROUND BOND TEST POINTS ARE NEEDED, IT BECOMES INTERESTING TO AUTOMATE THE TEST PROCESS FOR SAVING TIME AND MONEY, SECURING THE TESTING, AND TRACE ALL RESULTS. OUR MATRIXES ARE DEDICATED FOR THAT JOB.

  • Maia 100

    La stampante 3D maia100, versione “entry level” della serie desktop, primeggia per la sua compattezza privileggiando l’installazione su scrivanie e piani di lavoro. La maia100 è dotata di un estrusore di stampa che permette l’utilizzo di un unico colore per volta o, in alternativa, grazie all’accessorio Plus acquistabile separatamente aggiungere un secondo colore o l’utilizzo di materiale di supporto. Le caratteristiche di stampa sono tipiche dei prodotti di fascia alta, le guide, tutte composte da madreviti precaricate garantiscono una precisione di ripetitività pari allo 0,02 mm per m garantendo modelli dalla fedeltà unica, anche nei dettagli più piccoli. I fi lamenti adottati dalla stampante 3D maia100Pro sono frutto di una ricerca meticolosa nel settore dei tecnopolimeri, è per questo motivo che, tutti i fi lamenti, disponibili nelle dimensioni da 1,75 mm e 3,00 mm, sono forniti in apposite bobine sigillate certifi cate a garantite da 3dmaker printers.

  • Maia100Pro

    La stampante 3D maia100Pro, è una stampante di tipo desktop, grazie alla sua compattezza, è un oggetto facilmente posizionabile su una scrivania e comunque in un ambiente di lavoro dinamico. La maia100Pro è dotata di due estrusori di stampa che permettono l’utilizzo combinato o di un unico colore per volta più materiale di supporto, o di due colori contemporaneamente per stampe a due colori o, in alternativa, grazie all’accessorio Plus acquistabile separatamente aggiungere un secondo colore contemporaneamente all’utilizzo di materiale di supporto. Le caratteristiche di stampa sono tipiche dei prodotti di fascia alta, le guide, tutte composte da madreviti precaricate garantiscono una precisione di ripetitività pari allo 0,02 mm per m garantendo modelli dalla fedeltà unica, anche nei dettagli più piccoli.

  • MAIA 300

    La stampante 3D maia300, versione “entry level” della serie 300 è un prodotto semplice ma dalle grandi prestazioni, ha una sola testina di stampa che permette l’utilizzo di un unico colore o materiale. Come gli altri prodotti della sua categoria è stata progettata e realizzata con l’obiettivo di realizzare modelli che sapranno sbalordire anche nei più piccoli dettagli, ciò grazie anche alle guide, tutte composte da madreviti precaricate che garantiscono una precisione di ripetitività pari allo 0,02 mm per m per modelli dalla fedeltà unica, anche nei dettagli più piccoli.La stampante 3D maia300, ha un carter interamente realizzato in metallo per garantire al prodotto una maggiore robustezza il tutto in dimensioni ridotte che ne fanno senza alcun problema un ottimo sistema di prototipazione rapido da ufficio.

  • Maia 300Pro

    La stampante 3D maia300Pro, derivata dalla 300, grazie alla sua configurazione permette l’utilizzo contemporaneo di un colore più materiale di supporto, o due colori contemporaneamente non miscibili o in alternativa due materiali diversi.Le configurazioni possibili, la struttura, robusta ed elegante, ed il software ne fanno un prodotto importante e distintivo in uno studio di prototipazione.

  • Maia 300Pro2

    La stampante 3D maia300Pro2, è una stampante dalle grandi prestazioni. Le sue caratteristiche sono quelle tipiche dei prodotti di fascia alta, grazie alle guide, tutte composte da madreviti precaricate che garantiscono una precisione di ripetitività pari allo 0,02 mm per m per modelli dalla fedeltà unica, anche nei dettagli più piccoli.La stampante 3D maia300Pro2, ha un aspetto semplice ma allo stesso tempo elegante, con carter interamente realizzato in metallo per garantire al prodotto una maggiore robustezza il tutto in dimensioni ridotte che ne fanno senza alcun problema un ottimo sistema di prototipazione rapido da ufficio.

  • Maia 500

    La stampante 3D maia500Pro2, è una stampante dedicanta a chi ha nacessità di produrre prodotti dalle dimensioni importanti per altezza, infatti, grazie all’innovativo sistema “high elevation” essa può raggiungere i 500 mm. Dotata inoltre di tre cassetti permette una personalizzazione unica nel suo genere, infatti è possibili adottare una combinazione di due colori più materiale di supporto, tre colori senza materiale di supporto, due materiali diversi per caratteristiche fisico-meccaniche più materiale di supporto o tre materiali diversi sempre per caratteristiche fisico-meccaniche. Tutto ciò grazie al software makerdesign che scelto il contenuto dei cassetti setta in automatico la modalità di estrusione di ogni prodotto al fine di garantire stampe mozzafiato.

  • Maia 500Pro

    La stampante 3D maia500Pro, è una stampante dedicanta a chi ha nacessità di produrre prodotti dalle dimensioni importanti per altezza, infatti, grazie all’innovativo sistema “high elevation” può raggiungere i 500 mm. Dotata inoltre di tre cassetti permette una personalizzazione unica nel suo genere, infatti è possibili adottare una combinazione di due colori più materiale di supporto, tre colori senza materiale di supporto, due materiali diversi per caratteristiche fisico-meccaniche più materiale di supporto o tre materiali diversi sempre per caratteristiche fisico-meccaniche, il tutto grazie al software makerdesign che scelto il contenuto dei cassetti setta in automatico la modalità di estrusione di ogni prodotto al fine di garantire stampe mozzafiato.

  • Maia 500Pro2

    La stampante 3D maia500Pro2, è una stampante dedicanta a chi ha nacessità di produrre prodotti dalle dimensioni importanti per altezza, infatti, grazie all’innovativo sistema “high elevation” può raggiungere i 500 mm. Dotata inoltre di tre cassetti permette una personalizzazione unica nel suo genere, infatti è possibili adottare una combinazione di due colori più materiale di supporto, tre colori senza materiale di supporto, due materiali diversi per caratteristiche fisico-meccaniche più materiale di supporto o tre materiali diversi sempre per caratteristiche fisico-meccaniche, il tutto grazie al software makerdesign che scelto il contenuto dei cassetti setta in automatico la modalità di estrusione di ogni prodotto al fine di garantire stampe mozzafiato.

  • Maia 700Pro

    La stampante 3D maia700Pro, è una stampante dai volumi di stampa importanti, le sue dimensioni se pur compatte permettono di stampare volumi dalle dimensioni in pianta pari a 450 x 450 mm. Come quelle serie 500, anch’essa è dotata inoltre di tre cassetti permette una personalizzazione unica nel suo genere, infatti è possibili adottare una combinazione di due colori più materiale di supporto, tre colori senza materiale di supporto, due materiali diversi per caratteristiche fisico-meccaniche più materiale di supporto o tre materiali diversi sempre per caratteristiche fisico-meccaniche, il tutto grazie al software makerdesign che scelto il contenuto dei cassetti setta in automatico la modalità di estrusione di ogni prodotto al fine di garantire stampe mozzafiato.

  • Maia 700Pro2

    La stampante 3D maia700Pro, è una stampante dai volumi di stampa importanti, le sue dimensioni se pur compatte permettono di stampare volumi dalle dimensioni in pianta pari a 450 x 450 mm. Come quelle serie 500, anch’essa è dotata inoltre di tre cassetti permette una personalizzazione unica nel suo genere, infatti è possibili adottare una combinazione di due colori più materiale di supporto, tre colori senza materiale di supporto, due materiali diversi per caratteristiche fisico-meccaniche più materiale di supporto o tre materiali diversi sempre per caratteristiche fisico-meccaniche, il tutto grazie al software makerdesign che scelto il contenuto dei cassetti setta in automatico la modalità di estrusione di ogni prodotto al fine di garantire stampe mozzafiato.

  • ROBOT VOLANTE DIDATTICO “APIS TRAINER”

    “APIS Trainer” è una famiglia di robot volanti concepita per un uso didattico, e viene offerta in kit orientati a diverse discipline, come la meccatronica, l’informatica e l’aeronautica. La famiglia APIS incorpora tutti i meccanismi di sicurezza (safety) richiesti dalle recenti normative ENAC, come, ad esempio, l’atterraggio automatico in caso di assenza di segnale GPS, l’atterraggio in caso di superamento della zona predefinita di “geofence”, il controllo di emergenza dissimilare (un radiocomando esterno consente di controllare il mezzo aereo da parte di un pilota, pronto a prenderne il controllo in caso di necessità).

  • Termocamera FLIR TAU 2

    FLIR® Tau® 2 thermal imaging cameras offer an unmatched set of features, making them well-suited for demanding applications like Unmanned Airborne Vehicles (UAVs), thermal weapon sights, and handheld imagers. Improved electronics now give Tau 2 even more capabilities, including radiometry, increased sensitivity (<30mK), 640/60Hz frame rates, and powerful image processing modes that dramatically improve detail and contrast. Since the electrical function are common between the Tau 2 640, 336 and 324, integrators have direct compatibility between the different camera formats, and Tau camera versions share many of the same lens options.

  • 3310F SERIES DC Electronic Load

    3310F DC Electronic Load 60V, 30A, 150W more3311F DC Electronic Load 60V, 60A , 300W more3312F DC Electronic Load 250V,12A,300W more3314F DC Electronic Load 500V,12A,300W more3315F DC Electronic Load 60V,15A,75W

  • KIMO PRODUCTS

  • Prodigit 3340G Series

    3341G LED DC Electronic Load Simulator 300V, 24A, 300W 3342G LED DC Electronic Load Simulator 500V, 12A, 300W 3343G LED DC Electronic Load Simulator 500V, 24A, 300W 33401G LED DC Electronic Load Simulator 500V, 6A, 150Wx2

  • 3300 SERIES Eletronic Load Mainframe

    3302C Single Channel Mainframe more3302C-01 Single Channel Mainframe (with GPIB Interface) more3300C Four Channel Mainframe more3300C-01 Four Channel Mainframe (with GPIB Interface) more3301A Four Channel Mainframe (with GPIB Interface, Listen Only) more3301A-01 Four Channel Mainframe more3300F Four Channel Mainframe more3305F Two Channel Mainframe more3302F Single Channel Mainframe

  • elektro automatik

    The Complete Power Supply Range?
    EA offers a large variety of power-supply products for laboratories, industries and vocational training. EA-Power supplies are optimized  to make best use of the available energy and have an overall efficiency above average.?

    * Laboratory power supplies, industrial power supplies, with flexible auto-ranging output?
    * Electronics loads (even with recovery function) and inverters?
    * Built-in, Din rail, 19“ format power supplies ??Research is the basis for our visions for the future

    ?At EA, research and development have the highest significance. Our power-supply products meet or exceed the latest technological standard.  All relevant EMC and safety-compliance tests are done in our in-house laboratories?

    Tailor-made: Fast and efficient
    ?Direct and fast communication is our strength. Our customers value the fast and straight contact, enabling us to cater for their wishes and requirements in the most effective manner. What has just come up us an idea today, is under design tomorrow and completed the day after tomorrow.

  • Certificato ISO9001

    Image and video hosting by TinyPic

  • FAB Totum

    The FABtotum is a multipurpose tool, the world's first Low Cost Desktop Personal Fabrication device that can operate a wide range of computer controlled manufacturing (CNC) and 3D-scanning processes. Print, Cut, Mill, Scan, Manipulate. Rinse and repeat! A seamless interaction between the physical and the digital world. While current 3D printers are defined as personal fabricators, there is so much more to personal fabrication than 3D printing alone! The FABtotum allows anyone to explore the endless possibilities of a multipurpose fabrication device.

  • PWR100 Power Integrity Station

    PWR100 Power Integrity Station

    Features & Benefits:

    • Full Featured VNA measures low frequency PDN impedance
      (up to 40MHZ)
    • Specialized Signal and EMI Probes make loadstep and impedance
      testing easier
    • Specialized Injectors enable power supply measurements
    • New Harmonic Injector Supercharges your Spectrum Analyzer

    PI STATION BUNDLE INCLUDES:

    • OMICRON Lab Bode 100 Vector Network Analyzer
    • 1-Port and 2-Port 1 GHz 50 ohm Tranmission Line PDN Probes
    • Signal Injectors and Impedance Adapters
    • EMI Bundle with Low Noise Amplifier
    • Harmonic Comb Injector
    • High Performance Cable and Connector Kit
    • Power Integrity Training: VRTS3 Kit and Power Integrity Text Book

    MODEL

    DESCRIPTION

    PWR100

    POWER INTEGRITY STATION

    PWR100

    POEWR INTEGRITY STATION BUNDLE ( DOES NOT INCLUDE THE BODE FORCUSTOMERS THAT ALREADY HAVE THE BODE 100 VNA)

    ICLUDES

    DESCRIPTION

    OL000100

    BODE 100 VECTOR NETWORK ANALYZER

    INJB03

    INJB03 INJECTOR BUNDLE#3 (INCLUDES J2111A CURRENT INIECTOR, J2101 INJECTON TRASFORMER 10Hz- 45MHz, J2120 LINE INJECTOR, J2140 ATTENUATOR, J2170 HIGH PSRR POWER ADAPTER, USER MANUEL, 1 YEAR WARRANTY

    P21B01

    PDN PROBE BUNDLE, ACCESSORY KIT TWO P2130A DC BLOCKERS

    OL000152/OL000153

    B-SMC AND B-WIC INPENDANCE ADAPTERS

    EMIB01

    EMI PROBES/ J2180A AMPLIFIER BUDLE

    J2150A

    HARMONIC COMB INJECTOR

    CBL001

    HIGH PERFORMANCE CABLECONNECTOR KIT

    TRN001

    VRTS3 DISTRIBUTED SYSTEM DEMO BOARD, POWER INTEGRITY TEXT BOOK

  • MR 160

    FLIR MR160
    Imaging Moisture Meter

    The FLIR MR160 Imaging Moisture Meter is the first of its kind. Equipped with a built-in thermal camera, MR160 is the only moisture meter with the power to show you exactly where to measure.
    Featuring Infrared Guided Measurement (IGM™) technology, the MR160 helps you quickly scan and target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings.
    An integrated pinless sensor and an external pin probe provide the
    flexibility to take either intrusive or non-intrusive measurements. Built tough with an industry-leading warranty, the MR160 can serve as your go-to troubleshooting tool right out of the box – or as the perfect complement to any high resolution thermal camera you already
    own – helping you find hidden moisture issues and capture reliable
    data more efficiently.

    IDENTIFY AND VERIFY WITH ONE TOOL.

    First-ever thermal imaging moisture meter
    • 80 x 60 Lepton® thermal imager powers IGM technology
    • Document thermal images and moisture readings on one screen
    • Review images and generate reports with free FLIR Tools software

    TROUBLESHOOT QUICKLY.

    Easily investigate insulation and moisture issues
    • Pinless technology for fast non-intrusive measurements
    • External pin probe included for contact moisture measurements
    • Easy targeting with laser pointer and display cross-hairs

    PORTABLE, TOUGH AND DURABLE.

    Drop tested rugged design
    • Industry-leading warranty
    • Small form factor to conveniently carry with you
    • Internal rechargeable battery with USB

    Specifications

    FLIR MR160: Imaging Moisture Meter

    Thermal imaging detector

    FLIR Lepton® microbolometer

    Image Calibration

    Automatic

    Thermal image resolution (W × H)

    4800 pixels (80 × 60)

    Spectral response

    8–14µm

    Field of view (W x H)

    51° × 38°

    Thermal sensitivity

    <0.15°C

    Image frame rate

    9 Hz

    Image Display

    Color moisture alert

    Minimum focus distance

    10cm (4")

    Moisture Measurement

    Pin moisture via external probe range (accuracy)

    0–100% WME (± 5%)

    Pin moisture groups

    9 material groups

    Pinless moisture range

    0–100 relative measurement

    Pinless Measurement Depth

    0.75" (19mm) Max

    Measurement resolution

    0.1

    Response time pinless

    100ms

    Response time pin mode

    750ms

    General information

    Display (W x H)

    QVGA (320 x 240 pixel) 2.3” 64k color TFT

    Saved image file format

    BMP with measurement values overlaid

    Stored image capacity

    9999 images

    Laser orientation

    Single laser pointer to center of thermal image

    Power requirements

    Integrated rechargable battery

    Battery power - continuous run time

    18 hours max

    Battery power - typical usage

    4 work weeks*

    Battery

    3.7 V, 3000 mAh Li-ion rechargeable via micro USB

    Drop Test

    9.8’ (3m)

    Certification standards

    EN61326 (EMC), EN61010 (battery + charger), EN60825-1 class 2 (Laser)

    Agency approvals

    FCC class B, CE, UL

    Warranty

    2 Yr Product, 10 Yr Thermal detector**

  • TecQuipment TORQUE AUTUMN 2015

  • TV900 MANTIDE

  • TV650 GEKO

  • TV330 APIS

  • Fluke i2500-10 Sonda di corrente flessibile 2500A 25cm

    SONDA DI CORRENTE I2500-10 IFLEX: FLESSIBILITÀ DI MISURA SENZA PRECEDENTI

    La nuova sonda di corrente flessibile Fluke iFlex™ espande la gamma di alcuni misuratori Fluke fino a 2.500 A AC, garantendo al contempo una flessibilità di misura estrema. Le sonda di corrente iFlex™ possono essere connesse direttamente al multimetro e consentono di visualizzare le misure di corrente senza il ricorso a fattori di scala, che sono soggetti a errori. Il cavo da 1,8m consente la separazione tra la posizione di misura e il multimetro a pinza, facilitando così la lettura del display. Le grandi dimensioni del toroide e la sezione trasversale sottile consentono di effettuare misure di conduttori di dimensioni non standard e migliorano l’accesso a spazi angusti. Disponibile in misure da 25 cm e 45 cm.

     

    CARATTERISTICHE

     

    • 2.500 A AC per misure di corrente con alcuni multimetri Fluke
    • Funziona con le funzionalità di frequenza, corrente di spunto e valore min/max di alcuni multimetri
    • Espande la gamma di misura fi no a 2.500 A AC e consente una maggiore flessibilità di visualizzazione, permette di misurare conduttori di dimensioni non standard e migliora l’accesso al cablaggio
    • Classe di sicurezza CAT IV 600 V, CAT III 1000 V
    • Il diametro della bobina di 7,5 mm consente di eseguire misure negli spazi più angusti
    • Cavo da 1,8 m (6 ft)
    • Garanzia di tre anni

  • Fluke 124 Oscilloscopio Industriale ScopeMeter 40MHz

    L'Oscilloscopio Fluke 124 è la soluzione ideale per la ricerca guasti nelle applicazioni industriali e delle installazioni.

    Lo ScopeMeter 124 è uno strumento di misura completamente integrato, che racchiude in un unico, affidabile prodotto di facile utilizzo un oscilloscopio, un multimetro ed un registratore "senza carta".

    Risolve con rapidità i problemi che possono verificarsi nei macchinari, nelle strumentazioni e nei sistemi di controllo ed alimentazione.

  • Fluke 1587 - Multimetro con tester di isolamento fino a 1000 Volt

    FLUKE 1587 - Due potenti strumenti in uno Il multimetro Fluke 1587 per test di isolamento è stato progettatato per testare motori, generatori, cavi o gruppi di comando con le prestazioni di multimetro digitale TRMS e un tester di isolamento fino 1000 Volt ma a un costo molto inferiore rispetto all'acquisto dei due singoli strumenti.

  • Fluke 1730 Registratore Energia Trifase

     

    Progettato appositamente per utenti interessati al risparmio energetico, l'analizzatore del consumo energetico trifase Fluke 1730 introduce un modo nuovo e semplice di individuare gli sprechi energetici. La profilazione dell'uso di energia nell'impianto aiuta a identificare le opportunità di risparmio energetico e fornisce dati intuitivi, necessari per operare nel modo corretto.

  • Fluke 323 Multimetro a pinza AC 400A/600V

    Le misure a vero valore  RMS e le caratteristiche ergonomiche ottimizzate rendono i multimetri a pinza Serie 320 i migliori strumenti di ricerca guasti generica per gli elettricisti del settore commerciale e residenziale. Il modello Fluke 323 è l'ideale per misure di corrente fino a 400 A in alloggiamenti cavi stretti.

    Capacità di misura

    • Misura di corrente 400 A AC
    • 600 V per misure di tensione AC e DC
    • Corrente e tensione AC a vero valore RMS per misure accurate dei segnali non lineari
    • Misura della resistenza fino a 40 kO con rilevamento di continuità


    Caratteristiche

    • Design sottile ed ergonomico
    • Classe di sicurezza CAT IV 300 V/CAT III 600 V
    • Pulsante Hold
    • Due anni di garanzia
    • Borsa morbida per il trasporto

  • Fluke 707 Calibratore di Loop 4-20mA

    Lo strumento che consente di eseguire controlli di loop rapidi e con una sola mano. Basta un "click"

    Questa soluzione ricca di funzioni unisce le migliori caratteristiche dei calibratori di loop con pulsante e manopola e offre:

    • Ampio display ed interfaccia semplice e rapida per consentire un agevole utilizzo con una sola mano.
    • Letture di mA e % simultanee per una rapida e facile interpretazione delle misure.
    • Risoluzione di 1 µA per la generazione, simulazione e misura di mA.
    • Pulsante con intervalli del 25% per controlli di linearità rapidi ed agevoli.
    • “Span check” 0-100% per una conferma rapida dello zero e dell’intervallo.
    • Funzioni di rampa lenta, veloce e step selezionabili, per fornire delle uscite attenuate per il controllo dell'apertura delle valvole e i test funzionali di loop.
    • Alimentazione interna a 24 volt, per poter alimentare e leggere un trasmettitore nello stesso momento senza dover portare un multimetro digitale.
    • Misura la tensione dc fino a 28 V.
    • Un sola batteria da 9V, facile da sostituire senza dover rompere il sigillo di calibrazione
    • Funzionamento di default all'accensione 0 - 20 mA o 4 - 20 mA.
    • Innovativo selettore di regolazione delle uscite con una risoluzione di 100 e 1 µA.
    • La modalità HART ™ consente di collegare in serie un resistore da 250 O con loop a 24 V per la compatibilità con i dispositivi di comunicazione HART.

  • Fluke 717 30G Calibratore di Pressione

    Panoramica delle funzioni

     

    • Misura della pressione, 0,05% del fondo scala con sensore interno, fino a 30 psi
    • Misura mA con precisione dello 0,15%, risoluzione di 0,001 mA e alimentazione loop da 24 V.
    • Misura della pressione a 10.000 psi/700 bar, utilizzando uno dei 29 moduli di 29 Fluke 700Pxx
    • Connettore di pressione femmina 1/8 NPT
    • Compatibilità con gas e liquidi non corrosivi
    • Selezione di undici unità tecniche diverse
    • Funzioni Zero, Min, Max e Hold
    • Calibrazione di strumenti P/I con misura simultanea di pressione e corrente
    • Funzione di prova pressostato in grado di rilevare impostazioni, ripristino e valori della zona morta di un pressostato
    • Calcolo della % di errore delle misure mA per una rapida decisione di esecuzione del test passa/non passa
    • Lunga durata delle batterie
    • Guscio protettivo con scomparto per puntali
    • Compatibile con il sistema di aggancio magnetico ToolPack
    • Nuova funzione di prova del pressostato


    PRESSIONE

    • Precisione: 0,05% del fondo scala
    • Funzioni: Zero, Min, Max, Hold, Damp
    • Gamma: Da -12 a 30 psi, (da -850 mbar a 2 bar; da -83 a 206,84 kPa)
    • Risoluzione: 0,001 psi, 0,1 mbar, 0,01 kPa
    • Sovrapressione: 2 X fondo scala

     

    CORRENTE

    • Gamma: Da 0 a 24 mA (da -25% a 125%)
    • Risoluzione: 0,001 mA
    • Precisione: 0,015% + 2 punti


    ALIMENTAZIONE LOOP

    • Gamma: 24 V cc
    • Precisione: +/- 10%
    • Nota: alimentazione 20 mA in 1000 ohm per batteria > 6,8 V; 700 W per batteria da 5,8 a 6,8 V

     

    SPECIFICHE

    • Specifiche di sicurezza: CSA C22.2 n. 1010.1:1992
    • Dimensioni: 201 mm x 98 mm x 52 mm (L x A x P)
    • Peso: circa 600 g con guscio
    • Garanzia: 3 anni
    • Urti e vibrazioni: Casuale, 2G, 5-500 Hz
    • Test di caduta: 1 m
    • Tipo di batterie: Batteria alcalina singola da 9 V ANSI/NEDA 1604A o IEC 6LR619V 

  • Fluke 9040 rilevatore senso ciclico delle fasi

    Il Fluke 9040 è lo strumento efficace per i test di rotazione delle fasi nei settori in cui motori, comandi e sistemi elettrici hanno un'alimentazione trifase. Fluke 9040 è un indicatore di campo di rotazione che visualizza chiaramente su un display LCD il valore dell'alimentazione trifase e la direzione di rotazione delle fasi per la determinazione dei corretti collegamenti. Lo strumento determina rapidamente la sequenza delle fasi e offre una gamma di tensioni (fino a 700 V) e di frequenze appropriata per le applicazioni commerciali ed industriali. Le sonde di test in dotazione offrono una chiusura variabile che consente contatti sicuri, anche nel caso di prese industriali.

     

    Caratteristiche:

    • Indicazione trifase
    • Indicazione di rotazione delle fasi
    • Display LCD nitido
    • Non richiede batterie

  • Fluke 9062 Indicatore senso ciclico delle fasi e rotazione

    Fluke 9062 è l'unico strumento che fornisce un'indicazione sul senso di rotazione delle fasi e dei motori, con il vantaggio di rilevazione senza contatto.

    Ideato appositamente per gli ambienti commerciali e industriali, fornisce una rapida indicazione della rotazione trifase mediante l'utilizzo dei cavi di test in dotazione. Inoltre è possibile utilizzarlo per determinare la rotazione nei motori trifase sincroni e asincroni.

    La rilevazione senza contatto è ideale per motori in cui l'albero non è visibile.

    Le sonde di test in dotazione offrono una chiusura variabile che consente contatti sicuri, anche nel caso di prese industriali.


    Caratteristiche:

    • Indicazione trifase
    • Indicazione di rotazione di fase
    • Indicazione della direzione di rotazione dei motori
    • Determinazione senza contatto della direzione di rotazione dei motori durante il loro funzionamento

  • Fluke A3000 Modulo Pinza Amperometrica AC Wireless

    Il modulo per pinze amperometriche CA wireless FC a3000 Fluke è un misuratore con pinze amperometriche a vero valore RMS completamente funzionale che trasmette in modalità wireless i dati di altre unità master abilitate con Fluke Connect™, qui di seguito elencate:

    • Multimetro digitale FC 3000 Fluke
    • Termocamera a infrarossi Fluke Ti200/300/400
    • PC tramite adattatore FC pc3000 opzionale
    • Applicazione mobile Fluke Connect

    Il modulo per pinze amperometriche CA wireless FC Fluke 3000 con applicazione ha tutto il necessario per eseguire una ricerca guasti e misurazioni convenienti:

    • Multimetro a pinza CA a vero valore RMS
    • Misurazioni fino a 400 A CA
    • Utilizzo separato o come parte del sistema
    • Funzione di registrazione per memorizzare e salvare fino a 65.000 misure
    • Funzione corrente di spunto

  • Fluke A3001 Modulo di Corrente AC iFlex™ Wireless

    Il modulo corrente CA iFlex wireless FC a3000 Fluke è un misuratore con pinze amperometriche a vero valore RMS completamente funzionale che trasmette in modalità wireless i dati di altre unità master abilitate con Fluke Connect™, qui di seguito elencate:

    • Multimetro digitale 3000 FC Fluke
    • Termocamera Fluke Ti200/300/400
    • PC tramite adattatore FC pc3000 opzionale
    • Applicazione mobile Fluke Connect

    Il modulo corrente wireless iFlex™ consente di effettuare misure intorno a conduttori di dimensioni atipiche o in spazi ristretti, facilitando l'accesso ai fili:

    • Misurazioni fino a 2500 A CA
    • Utilizzo separato o come parte del sistema
    • Funzione di registrazione per memorizzare e salvare fino a 65.000 misure
    • Funzione corrente di spunto
    • Cinghia con aggancio magnetico

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117

Nuovi Prodotti

  • VT02

    VT02 è lo strumento all'avanguardia da utilizzare quando un'unica lettura ad infrarossi della temperatura non è sufficiente e un'immagine termica ad alta risoluzione non è necessaria

     Misurazioni della temperatura rapide e precise
    ? Visualizzazione visiva, ad infrarossi e mista della mappatura termica
    ? Rilevatori rapidi di punti caldi e freddi
    ? Apprendimento e utilizzo semplici
    ? Software di analisi e reporting SmartView® incluso

  • Termometri ad infrarossi Fluke 62 MAX, 62 MAX+

    Piccolo ma robusto.
    Perché scegliere i termometri ad infrarossi?
    Spesso la temperatura è il primo sintomo di un potenziale problema nelle applicazioni meccaniche ed elettriche. Tuttavia, come è possibile determinare con certezza se in un quadro elettrico è presente una zona calda, se un motore è surriscaldato o se un sistema HVAC è inefficiente? Grazie a un termometro ad infrarossi (IR). I termometri ad infrarossi portatili senza contatto consentono di misurare istantaneamente la temperatura delle attrezzature in zone difficili da raggiungere o in aree pericolose. Inoltre, il rilevamento precoce di temperature anomale assicura una risoluzione tempestiva dei problemi.
    Fluke 62 MAX e 62 MAX+
    Progettati tenendo a mente le esigenze di lavoro sul campo, i nuovi termometri ad infrarossi 62 MAX e 62 MAX+ di Fluke sono all'altezza della fama dell'azienda leader nel settore degli strumenti di misura. Piccole dimensioni, massima precisione e grande facilità di utilizzo. Categoria di protezione IP54 per impermeabilità e resistenza alla polvere. Precisi eppure sufficientemente robusti da sopportare senza danni una caduta da 3 metri. Infatti i termometri ad infrarossi 62 MAX e 62 MAX+, a differenza degli altri modelli in commercio, sono resistenti a tal punto che possono essere maneggiati senza eccessiva cautela

  • Multimetro digitale a vero valore RMS a sicurezza intrinseca Fluke 28 II Ex

    È ora disponibile un multimetro digitale a sicurezza intrinseca utilizzabile nelle aree IIC (gas), Zona 1 e 2, e nelle aree IIIC (polvere), Zona 21 e 22. Che lavoriate nell'ambiente petrolifero, in ambienti chimici o farmaceutici, tutti i test e la potenza per la ricerca guasti di cui avete bisogno sono assemblati nel più robusto multimetro digitale a sicurezza intrinseca (IS) che Fluke abbia mai realizzato. Fluke 28 II Ex è inoltre impermeabile, a prova di polvere e a prova di cadute. Vi consentirà di gestire qualsiasi situazione, all'interno e all'esterno delle zone di pericolo, senza compromettere la conformità alle normative o le prestazioni di misura.

  • Vibration Meter Fluke 805

    Il metodo affidabile, ripetibile e preciso per la verifica dei cuscinetti e delle vibrazioni totali. Consente di prendere decisioni relative alla manutenzione in totale sicurezza. Vibration Meter Fluke 805 è il dispositivo di analisi delle vibrazioni più affidabile per il personale di risoluzione dei problemi meccanici di primo intervento che ha bisogno di affidarsi a letture ripetibili, classificate in base alla gravità delle vibrazioni generali e delle condizioni dei cuscinetti.

  • Contatore di particelle Fluke 985

    Un nuovo approccio alla qualità dell'aria negli ambienti interni. Il nuovo contatore di particelle Fluke 985 è il dispositivo preferito dagli specialisti dei settori HVAC e IAQ. Dal controllo dei filtri alle verifiche di base della qualità dell'aria in ambienti chiusi (IAQ), il modello Fluke 985 è la soluzione portatile per il rilevamento delle concentrazioni di particelle sospese nell'aria. L'uso di Fluke 985 consente di offrire una risposta immediata ai reclami degli occupanti o di entrare a far parte di un programma completo di manutenzione preventiva.

  • BGM-201

    Digital precision Gaussmeter for determining the magnetic field strength of permanent magnets and systems High accuracy of ± 0.05 % Measurement of magnetizing pulses up to 30 kHz Digital filter for AC-measurement with high attenuation Capacitive touch-screen for user-friendly measurement Automatic temperature compensation Application in laboratories and in production lines

  • DSX120

    Dissaldatore ottimizzato DSX120.

    Velocità
    Potenza
    Manutenzione ridotta

  • WXDP120

    Dissaldatore WXDP120 è il nuovo modello della famiglia WX - Riscaldamento rapido (Range di temperature: 50 - 450°C, Potenza: 120 W,Tempo di riscaldamento: 35 sec. (50 - 350°C) - Nessuna manutenzione - Sicurezza - Risparmio economico - Save Energy

  • TI400 TI300 TI200

    Fluke presenta le nuove ed uniche termocamere dotate di autofocus LaserSharp™ per immagini sempre nitide ed a fuoco! Il nuovo sistema laser di messa ha una precisione estrema che nessun è in grado di offrire. L'oggetto da ispezionare viene messo a fuoco immediatamente con una visualizzazione e risoluzione ottimale. "Punta e scatta" sicuro d'essere a fuoco ogni singola volta

  • Tester per batterie Fluke BT521

    Con il nuovo tester per batterie Fluke BT521 è ora più facile che mai gestire sistemi di backup a batterie nei data center, nelle reti di telecomunicazioni e nei sistemi di distribuzione dell'alimentazione elettrica.

    • PIÙ TEST IN UNA SOLA VOLTA
    • MENO TEMPO
    • ANALISI DEI DATI AVANZATA
    • FLUSSO DI LAVORO SEMPLIFICATO

    Il nuovo analizzatore di batterie Fluke BT521 è lo strumento di misura ideale per la manutenzione, la ricerca guasti e i test sulle prestazioni delle singole batterie stazionarie e dei banchi batterie utilizzati in applicazioni critiche di backup.

  • VT04

    Fluke VT04 termometro ad infrarossi con schermo per visualizzazione termografica dotati di una fotocamera digitale integrata che consente la sovrapposizione di immagini termiche e visive nitide per diagnosticare i problemi nel minimo dettaglio.

  • BODE 100

    With the multifunctional Bode 100 you get an exact picture of your electronic circuits and components in a frequency range from 1 Hz to 40 MHz. The Bode 100 is not only a state of the art Vector Network Analyzer, it also works as •Frequency Response Analyzer •Impedance Meter •Gain Phase Meter •Sine Wave Generator Accurate and compact with an unbeatable price-performance ratio, it is the best choice for industrial applications as well as research and educational labs. Easily analyze: •Complex gain •Complex impedance and admittance •Reflection coefficient and return loss •Ultrasonic and piezo electric systems •Stability of control circuits such as DC/DC converters in power supplies •Swept S-parameters of electronic circuits •Group delay characteristics of your DUT •Frequency dependent impedance of high Q-circuits like oscillating crystals •Influence of termination on amplifiers or filters •Reflection and adaptation of antennas The VNA Bode 100 is the perfect tool for application fields like production, research and development, educational institutions as well as service and maintenance. Find out more at Application Notes & Know How. MEASURING TO GO The lightweight and portable hardware design combined with the Bode Analyzer Suite for Windows guarantee a very easy and user friendly handling of the Bode 100. Moreover, an OLE automation interface allows integrating the Bode 100 in any automated system. The Bode 100 system includes •Bode 100 User Manual (English) •Wide range power supply (with international plug adapters) •USB cable •4 x BNC cable 50 Ohm (m-m) •1 x BNC T adapter (f-f-f) •1 x BNC straight adapter (f-f) •1x BNC 50 Ohm load (m) •1 x BNC short circuit (m) •Test objects: quartz filter and •IF filter on a PCB

  • QUANTUM COMPOSER 9530 PULSE GENERATOR

    Our 9530 Pulse Generator provides the latest in laser timing and synchronization. Offering a unique 1U 19” rackmount package with all rear panel connections, it is well suited for integration into your rack timing and control systems. •250 ps Timing Resolution •< 50 ps Jitter •1U Rackmount Ready •Easy Programming Interface •4 or 8 Independent Channel Outputs •Free LabVIEW Driver •Ethernet, USB, RS232 Standard •Full Customer Support •2 Year Warranty

  • 9520 Series Digital Delay Pulse Generator

    9520 Series Digital Delay Pulse Generator Our 9520 Series Pulse Generator provides the utmost flexibility and performance in a bench-top digital delay pulse generator. •250 ps Timing Resolution •< 50 ps Jitter •Benchtop Design •Modular Design - Optical I/O - High Current - High Voltage •Easy Programming Interface •2, 4 or 8 Independent Channel Outputs •Free LabVIEW Driver •USB, RS232 Standard •GPIB, Ethernet Available •Full Customer Support •2 Year Warranty

  • 9250 Emerald Series Pulse Delay Generator NEW

    9250 Emerald Series Pulse Delay Generator NEW! The Emerald 9250 is the newest addition to our line of Digital Delay Pulse Generators. This unit will come standard with a 1 ppm OCXO oscillator, giving you performance you want without extra cost. • 5 ps Resolution •< 15 ps RMS Jitter •“Virtual” channel timers •Up to 20MHz external trigger rate •Fast Rise Time, <2ns •Wireless Option Via Bluetooth •Full Customer Support •2 Year Warranty

  • 9500+ Series Digital Delay Pulse Generator

    9500+ Series Digital Delay Pulse Generator Our 9500+ series of pulse generators provides a cost-effective yet highly flexible and functional approach for your synchronization and timing needs. •1 ns Timing Resolution •< 400 ps Jitter •Benchtop Design •Easy Programming Interface •2, 4 or 8 Independent Channel Outputs •Free LabVIEW Driver •USB, RS232, GPIB Standard •Ethernet Available •Full Customer Support •2 Year Warranty

  • 9600+ Series Digital Delay Pulse Generator

    9600+ Series Digital Delay Pulse Generator Our 9600+ Pulse Generator is the most affordable Pulse/Delay Generator in our family of products. Despite its low cost, this robust model offers a full range of features, making it ideally suited for the budget-sensitive user. •10 ns Timing Resolution •< 5 ns Channel to Channel Jitter •Benchtop Design •Easy Programming Interface •2, 4 or 8 Independent Channel Outputs •Free LabVIEW Drivers •RS232 Standard •Full Customer Support •2 Year Warranty

  • 9200+ Sapphire Series Pulse Delay Generator NEW

    9200+ Sapphire Series Pulse Delay Generator NEW! The Sapphire Plus is an upgraded version of our standard Sapphire Pulse Generators. It can be purchased as a new instrument or customers may also field upgrade their existing sapphire units. With the Sapphire Plus, intruments will have better performance but still retain great value. These units are perfect for those on a budget but looking for more precise resolution and jitter. • 5 ns Resolution •< 50 ps RMS Jitter •“Virtual” channel timers •Up to 20MHz external trigger rate •Fast Rise Time, <2ns •Optional 1ppm oscillator •Wireless Option Via Bluetooth •Full Customer Support •2 Year Warranty

  • 9710-9730 Series Digital Delay Current Generator -

    9710 Series Digital Delay Current Generator The 9710 Current Pulse Generator is an ideal fire set for squib, detonator, and pyrotechnics initiator testing. •200 ns Timing Steps •Up to 25 amps per Channel •2 or 4 Channel Outputs •Benchtop Design •Easy Programming Interface •TTL Sync output to T0 •Safety Interlock •Full Customer Support •2 Year Warranty 9730 Series Digital Delay Current Generator Our most capable current generator provides users with the ability to generate highly precise current pulses, making this unit ideal for applications that require a high level of accuracy and repeatability. Advanced safety features provide user assurance. •200 ns Timing Resolution •2 or 4 Channel Outputs •6 amps per channel •Easy Programming Interface •Integrated Bridgewire Resistance Measurement •Safety Interlocks and Keyed Front Panel Interface •12 Memory Storage Slots •TTL Sync output to T0 •Full Customer Support •2 Year Warranty

  • PROMO MSOX/DSOX4000A

  • Unità di rilavorazione WXR 3

    La nuova unità di rilavorazione/riparazione multifunzionale a 3 canali compatibile alla famiglia WX.

    Per maggiori informazioni sul prodotto consultare la sezione NEWS del nostro portale.

  • Offerta esclusiva con l'acquisto di una termocamera FLUKE

    Fluke offre GRATIS un Apple® Ipad® con l’acquisto di una termocamera* FLUKE.

    Ottieni il meglio delle termo immagini con la App Fluke Connect e l’Apple® Ipad® ed il software SmartView® mobile.

    Con Fluke Connect condividi i dati ed immagini con il tuo team ovunque tu sia e senza lasciare il campo.

    Richiedici maggiori informazioni.

  • LA-150 DC €15.000,00

    The Lab Assistant LA-150 DC probing system.   It is a simple yet stable and sturdy probing platform for 6" (150 mm) and smaller wafers, fragments or packages.   The LA 200 is ideal for Universities and R & D Centers where applications dictate that each researcher has their own station, that the station be small enough to fit on a desk or small work bench, the station be easy to set up and use, and the cost of the complete station is reasonable.  Includes prober, microscope and 2 -MA-8000 coaxial manipulators with magnetic base.  USER INSTALLED

    Per configurazioni di probe station semiautomatiche e automatiche, contattateci sul nostro sito web

  • RF BROADBAND BI DIRECTIONAL COUPLER

    RF Broadband bidirectional coupler - range da 0,01 MHz a 2 GHz. Per maggiori informazioni sulle caratteristiche del prodotto consultare il link sottostante.

  • LOW NOISE BROADBAND AMPLIFIER MODULE

    Low Noise Broadband Amplifier Module - amplifier range da 0,1 MHz a 2,6 GHz. Per maggiori informazioni sulle caratteristiche del prodotto consultare il link sottostante.

  • AC Power Sources

    Chroma designs and manufactures five families of leading edge programmable AC power sources, precision power supplies, frequency converters and related instrumentation for simulating AC mains and line fault simulations conditions. Our AC Power Sources are used in automatic testing equipment and bench top applications including avionics testing, IEC testing, Mil-std-704 Avionics, DO-160 Shipboard testing and power supply test applications.

  • Programmable DC Power Supplies

    Our programmable DC Power Supplies are commonly used in automated testing systems and bench top applications for DC-DC converters, Telecom, Battery charge and simulation, Automotive, Solar panel simulation, Burn-in, and plating/electrolysis applications. These variable DC Power Supplies range from 600W to 5000W. Constant power operating envelope, current range up to 160A and high precision current read back make these power sources ideal for automatic test system applications as well as benchtop applications.

  • EasyTrack2

    Excellent for quick, accurate and economical temperature profiling, this temperature monitoring system features the EasyTrack® data logger, thermal barrier and thermocouples, as well as temperature profiling software.EasyTrack2 provides up to 6000 data points per channel for detailed thermal profiles. Its single page standard report is excellent for ISO 9000 validation and traceability of powder coating processes. In addition, EasyTrack2 can be used in high temperature PTFE Dacromet cure andwrinkle-free garment cure applications.For detailed information, visit the website below.

  • Broadband and Wireless RF Power Amplifier

    This solid state power amplifier is designed for realiable, trouble-free service.It operates in class A and includes RF protection circuits, fan cooling, and a 230 V AC power supply. The amplifier is accommodated in a 19" system housing. Per maggiori informazioni sul prodotto, consultare il link sottostante.

  • RF Power Amplifier module - Broadcast TV,OFDM,HDTV Power amplifier

    This solid state power amplifier is designed for realiable,trouble-free service.It operate in a class A/AB so as a 12 V DC power supply. The amplifier is accommodated in aluminium housing. Per maggiori informazioni sul prodotto, consultare il link sottostante.

  • Model 35

    The Picoprobe Model 35 has been engineered to meet the stringent demands of advanced high frequency circuit designers. This probe combines full DC capability, rise/fall times of 14 ps, and a nominal loading input impedance of 1.25 megohms shunted by 0.05 pf. Signal attenuation is 10:1 with a 50 ohm oscilloscope input. Like our other active probes, the Model 35 achieves its bandwidth using just one probe point, which greatly simplifies internal node testing without sacrificing performance. An assortment of user replaceable probe tips are available for a variety of probing needs. The Model 35 is powered by our new PS-3 power supply

  • Picoprobe Model 7 and Model 7A

    PICOPROBE® MODEL 7 was designed as a companion probe to Models 12C and 18C for driving integrated circuit lines so the Model 12C and 18C can be used to measure the response of adjacent nodes. The Model 7 consists of a flexible 6 foot, 50 ohm coaxial cable accurately terminated to 50 ohms in order to avoid undesirable reflections. A special miniature connector receives replacement coaxial probe tips that provide a shielded environment to within 3 mm of the fine tungsten probe point, thus minimizing capacitive coupling to other parts of the circuit. The replaceable coaxial probe tips are offered in various point sizes and can also be bent to any shape in order to accommodate a variety of probing geometries. PICOPROBE® MODEL 7A, an unterminated version, can be used for capacitance and resistance measurements or in low to medium speed signal applications where a 50 ohm termination is not required. A flexible coaxial cable length of 6 feet in length is standard on the Model 7A; however, when used for capacitance measurements, GGB Industries, Inc., recommends using a shorter 3 foot cable. If a shorter length of cable is desired for capacitance measurements, please specify it when ordering (Model 7A-3ft.). Please note that Model 7A uses Model 7 replacement tips. http://www.ggb.com/PdfIndex_files/mod7.pdf

  • Picoprobe by GGB Industries

    Distek è da oggi Distributore GGB Industries Picoprobe, azienda leader mondiale per la produzione di sonde ad alta frequenza, microwave di precisione e manipulators per probestation, in grado di risolvere problematiche di alta impedenza per studi diagnostici del funzionamento di chips complessi, oltre che risolvere esigenze on-wafer probing nel settore dei semiconduttori.

  • Model 34A

    The PICOPROBE® MODEL 34A was engineered to meet the stringent demands of advanced high frequency circuit designers. This high impedance probe combines full DC capability, rise/fall times of 120 ps, and a nominal loading input impedance of 10 megohm shunted by 0.1 pf. Signal attenuation is 20:1 with a 50 ohm oscilloscope input. Like our other active probes, the Model 34A achieves its bandwidth using just one probe point, which greatly simplifies internal node testing without sacrificing performance. An assortment of user replaceable probe tips are available for a variety of probing needs. The Model 34A is powered by our standard Picoprobe® power supply.

  • Model 10

    PICOPROBE® MODEL 10 is a multipurpose, high speed, passive probe which can be used for driving as well as receiving signals. The Model 10 consists of a one meter length of flexible 50 ohm coaxial cable terminated by a carefully trimmed SMA on one end and by a miniature, high speed 50 ohm connector, specially developed to receive Model 10 replaceable coaxial probe tips, on the other. The 50 ohm coaxial cable was custom designed for Model 10 to be high speed, yet very flexible, so that moving the cable would not disturb the probe points.
    Adaptable for a wide range of applications, the Model 10 uses a variety of special purpose, easily replaceable probe tips. Each probe tip consists of a 1.5 inch long 50 ohm semi-rigid coaxial line, a retaining nut, one or two probe points, and a variety of electrical components tailored to achieve the desired electrical characteristics. To drive or receive signals on 50 ohm circuit points, the Model 10 should be fitted with a probe tip that has two probe points, one for the ground and one for the signal. Probe points which extend 0.120 inches beyond the 50ohm coaxial probe tip have been designed for dc to 3.5 GHz response and probe points which extend 0.030 inches beyond the probe tip have been designed for dc to 7 GHz response. The longer 0.120 inch tips are more flexible, making them more durable and easier to use than the shorter 0.030 inch style.

  • Model 40A

    The GGB Industries, Inc., MODEL 40A microwave probe sets new standards in microwave probing performance. Using low loss coaxial techniques, the Model 40A achieves an insertion loss of less than 0.8 db and a return loss of greater than 18 db through 40 GHz.

  • Model 40M Low Loss Picoprobe

    MODEL 40A PICOPROBE®. This probe is recommended for certain types of load pull and noise parameter measurements when even our standard, super low, 0.75 db insertion loss (typical at 40 GHz) is too high. We also offer low loss probes in DC to 50GHz and DC to 67GHz. 

  • Model 50A

    The GGB Industries, Inc., MODEL 50A probe sets new standards in microwave probing performance. Using low loss coaxial techniques, the Model 50A achieves an insertion loss of less than 1.0 db and a return loss of greater than 18 db through 50 GHz.With its individually spring loaded, Beryllium-Copper or optional tungsten tips, the Model 50A provides reliable contacts, even when probing non-planar structures. This reliable low resistance contact is one of the keys to providing highly repeatable measurements. The Model 50A also provides direct viewing of the probe tips for accurate positioning.The Model 50A can be mounted in various adaptors (see below) for use with standard microwave probe stations. Custom mounts are available as well.Any pitch (tip spacing) from 25 to 1250 microns may be specified. The probe can be configured with Ground-Signal-Ground (G,S,G), Ground-Signal (G,S), or Signal-Ground (S,G) tip footprints.Connection to the Model 50A is through a female 2.4mm connector which is also compatible with the V connector. 

  • Model 67A

    A coplanar probe with patented flexible tips, the MODEL 67A microwave probe sets new standards in microwave probing performance. Using low loss coaxial techniques, the Model 67A achieves an insertion loss of less than 1.1 db and a return loss of greater than 14 db through 67 GHz.With its individually spring loaded, Beryllium-Copper or optional Tungsten tips, the Picoprobe® Model 67A microwave probe provides reliable contacts, even when probing non-planar structures. This reliable low resistance contact is one of the keys to providing highly repeatable measurements. The Model 67A also provides direct viewing of the probe tips for accurate positioning.The Model 67A can be mounted in various adaptors for use with standard microwave probe stations. Custom mounts are available.Any pitch (tip spacing) from 25 to 1250 microns may be specified. The probe can be configured with Ground-Signal-Ground (G,S,G), Ground-Signal (G,S), or Signal-Ground (S,G) tip footprints. We recommend smaller pitches with a G,S,G footprint for best results.

  • Model 110H

    The PICOPROBE® MODEL 110H is a high performance microwave probe which incorporates our patented coaxial design techniques and has inherent low loss and low dispersion characteristics. Like all of our Picoprobe microwave probes, the Model 110H has customer-preferred features such as: individually spring loaded Beryllium-Copper tips which provide reliable contacts even when probing non-planar structures; direct viewing of probe tips for accurate positioning; and can be designed to almost any pitch and footprint. Smaller pitches and Ground-Signal-Ground footprints are recommended for optimum performance. Connection to the Model 110H is via a female 1.0 mm connector. Please contact our office for additional information regarding the performance specifications of the Model 110H Picoprobe.

  • Model 50

    The MODEL 50 PICOPROBE® sets new standards in microwave probing performance. Benefiting from coaxial techniques, which have inherent low loss and low dispersion characteristics, the Model 50 Picoprobe®, with or without the bias T option, achieves an insertion loss of less than 0.8 db (typical) and a return loss of greater than 15 db (max.) over its frequency range. With its individually spring loaded, Beryllium-Copper tips, the Model 50 Picoprobe® provides reliable contacts, even when probing non-planar structures. This reliable low resistance contact is one of the keys to providing highly repeatable measurements (-55 db) at V band frequencies. The Model 50 Picoprobe® also provides direct viewing of the probe tips for accurate positioning. Any pitch (tip spacing) from 50 microns and up may be specified. The probe can be configured with Ground-Signal-Ground (G,S,G), Ground-Signal (G,S), or Signal-Ground (S,G) tip footprints. We recommend smaller pitches with a G,S,G footprint for best performance.

  • Model 75

    The MODEL 75 PICOPROBE® sets new standards in microwave probing performance. Benefiting from coaxial techniques, which have inherent low loss and low dispersion characteristics, the Model 75 Picoprobe, with or without the bias T option, achieves an insertion loss of less than 1.0 db (typical) and a return loss of greater than 15 db (max.) over its frequency range.With its individually spring loaded, Beryllium-Copper tips, the Model 75 Picoprobe® provides reliable contacts, even when probing non-planar structures. This reliable low resistance contact is one of the keys to providing highly repeatable measurements (-50 db) at V band frequencies. The Model 75 Picoprobe also provides direct viewing of the probe tips for accurate positioning.Any pitch (tip spacing) from 50 microns and up may be specified. The probe can be configured with Ground-Signal-Ground (G,S,G), Ground-Signal (G,S), or Signal-Ground (S,G) tip footprints. We recommend smaller pitches with a G,S,G footprint for best performance. Most customers are using GSG probes with a pitch of 100 to 250 microns.

  • Tungsten Probe Tips T-4 Series

    T-4 tips are for use in most standard commercial micropositioners for probing integrated circuits, pads, or lines. Each T-4 tip uses the same 10, 22, 35, 60, or 125 micron diameter tungsten wire as our Model 12C Picoprobe, but is mounted to a 0.020 inch diameter, 2 inch long tinned copper shaft.
    An advantage of the 10 and 22 micron models pointed out by some of our users is that because the tungsten probing wire is thin and flexible it minimizes damage to the integrated circuit and allows them to probe the device for a much longer period of time. The flexibleT-4 tip remains in contact with the circuit even in the presence of probe table vibrations.
    T-4 tips are not recommended for use on sensitive nodes where capacitance loading could be a problem. Instead, one of our high impedance Picoprobes should be used. If you would like T-4 samples, please contact our office.

  • The new Picotest PDN Probes

    Two new types of PROBES have been introduced: The Picotest PDN Probes. These new probes makes impedance and step load measurements EASY. These PROBES are expected to be a particularly hot item, as there really isn’t anything quite like them on the market. They greatly enhance the capabilities of the Bode 100 VNA. Their small size really eases measurement especially in tight places. Their technology enables more accurate impedance measurements. Please let us know if you have any questions. All the informations are available in the link below.

  • Lite Kit

    The basics: A pen, an LED module and some batteries! The Lite Kit has everything you need to get started with Circuit Scribe. It comes with one Conductive Ink Pen, one LED module, and two coin cell batteries. Find a magnetic surface - like a whiteboard or your refrigerator - and start making electronic sketches. € 30,00

  • Basic Kit

    Create circuits with our most fundamental component modules. The Basic Kit comes with our most fundamental components, but you can use them to create some cool circuits! Connect the LEDs in parallel or series, use capacitors to fade them on and off, or make a paper touch sensor with the NPN transistor. Kit comes with a Conductive Ink Pen. € 65,00

  • Basic Kit + Book

    A set of our most fumdamental modules plus our education workbook. In addition to the Conductive Ink Pen and Basic Kit modules, you'll also get a workbook filled with lessons and circuit templates that you can draw over. € 80,00

  • Maker Kit

    Basic Kit with additional sensors and output modules The Maker Kit will get you working with more advanced output components and sensors. Add sound to your circuits using the Buzzer, fade between colors on the RGB LED using the Potentiometer, or control your outputs with light using the Photosensor. Kit comes with a Conductive Ink Pen. € 110,00

  • Developer Kit

    A plethora of modules: our largest kit for paper electronics developers The Developer Kit is our largest set of components. It’s perfect for a large-scale electronic drawing with multiple sensors and outputs or for someone who wants to create new applications for conductive ink. It combines two sets of components from the Basic and Maker Kits plus the hardware connection kit and DIY boards. € 250,00

  • DC Electronic Loads

    Chroma is the global leader in DC Electronic Load manufacturing. Used for power testing in all markets including automatic test systems, LED, power supply testing, battery testing, fuel cell testing, Chroma's electronic loads come standard with either USB or RS232 control and can be configured for GPIB (IEEE-488) control as well.

  • RF Fiberoptic Link

    This RF fiberoptic link is designed for remote RF signal in a wide range of frequency between 500 Hz to 500MHz. Per maggiori informazioni sulle caratteristiche del prodotto consultare il link sottostante.

  • AC Electronic Loads

    Chroma's AC Electronic Loads are designed for testing uninterruptible power supplies(UPS), Off-Grid Inverters, AC sources and other power devices such as switches, circuit breakers, fuses and connectors.

  • Oven Tracker XL2

    Datapaq® offers the Oven Tracker® XL2 System, the latest generation of Oven Tracker systems for robust, comprehensive, intelligent and easy-to-use oven temperature profiling.For detailed information, visit the website below.

  • Furnace Tracker

    Datapaq® Furnace Tracker® Systems offer accurate and reliable in-process temperature surveying for various types of heat treating applications in the aluminum, steel, glass, forging and aerospace industries. To meet very specific system requirements, the Furnace Tracker System can be assembled from a selection of data loggers, protective thermal barriers and thermocouples, and completed with Insight profiling software for data storage and analysis.For detailed information, visit the link below.

  • Reflow Tracker Systems

    The Datapaq Reflow Tracker® System sets the industry standard for ease-of-use and reliability in thermal profiling. This rugged and reliable, yet lightweight system, is ideal for the following list of applications in electronics assembly and manufacturing: - Reflow - Wave Solder - Vapor Phase - Tack/Cure - Conformal Coating

  • SolarPaq Profiling System for CiGs Panel Coating

    The Datapaq® SolarPaq system has been designed specifically to monitor the temperature of the glass substrate as it passes through the vacuum coating process. The profiling system passes through the multi-chamber process, measuring the temperature profile from up to 4 positions on the glass; even with the plasma activated. This feature, combined with the unique reflective plate thermal barrier enables the system to be used without disrupting normal production flow.Monitoring this deposition process is key to optimizing it. Due to the nature of the processing equipment, this process was until now, very difficult and costly to measure. Now, for the first time, there is a system that can pass through the process and obtain full product temperature profiles.For detailed information and system specifications, visit the link below.

  • SolarPaq Profiling System for Anti-reflection Coating

    Datapaq® SolarPaq temperature profiling system for anti-reflection coating has been designed to monitor the product temperature profile as the photovoltaic (PV) cells pass through the plasma coating process. This system consists of Insight software, Q18 data logger, stainless steel thermal barrier and ultra fine type K thermocouples.Based on our research with the major equipment manufacturers, this profiling system has been designed to pass through the process chambers and measure the cell temperatures even with the plasma activated. This feature combined with the unique ability to be slotted straight into a unmodified cell carrier, enables temperature profiling to be conducted without disrupting normal production flow.For detailed information and system specifications, visit the link below.

  • Food Tracker System

    The Datapaq® Food Tracker® temperature profiling systems are comprised of a data logger, a protective thermal barrier and Insight software. With a Datapaq system, you can guarantee the quality and safety of your cooked meats, poultry, bakery products and ready-to-eat meals.Datapaq systems, designed to withstand the harshest environments, travel through the oven or freezer with the food product, making a complete record of product temperatures. You can monitor the product temperature for the entire cook/freeze cycle in either static or conveyorized ovens, as well as in steam cookers, deep fat fryers and blast freezers. For detailed information and system specifications, visit the link below.

  • Datapaq

    For Industrial Temperature Profiling please visit the link below, and for further informations please do not hesitate to contact DISTEK Strumenti e Misure Srl.

  • FLIR Promo

    Acquista una termocamera FLIR inclusa in questa promozione e avrai in regalo un dispositivo di imaging termico FLIR ONE per il tuo iPhone 5/5s! (Dal 15 Ottobre 2014 al 31 Dicembre 2014) Compila il modulo cliccando sul link sottostante.

  • Testec

  • Precision power amplifiers - 4-quadrant voltage amplifiers - A1230-01

    A 1230-01 4-quadrant voltage amplifier DC-7 MHz | 380 V/µs | 185 W (source) | 68 W (sink) - Broadband lab amplifier for ohmic and complex loads; - Ideally suitable as downstream equipment for function generators; - Addition of two inputs with 50 O and 100 kO input resistance, respectively, is possible; - A preamplifier output (Bridge out) allows for simple bridge circuit structures; - Full remote control possible through USB port 2 supply voltages.

  • PRECISION POWER AMPLIFIERS - 4-QUADRANT VOLTAGE AMPLIFIERS - A 1110-05

    A 1110-05 4-quadrant voltage amplifier DC-1 MHz | 100 V/µs | 500 W (source) | 90 W (sink) - Fully configurable and operable by means of the supplied software; - Symmetrical input; - series / parallel connection in case of higher voltage / current requirements; - USB port as series; - 2 supply voltages.

  • PRECISION POWER AMPLIFIERS - 4-QUADRANT VOLTAGE AMPLIFIERS - A 1110-16

    A 1110-16 4-quadrant voltage amplifier DC-1 MHz | 100 V/µs | 1000 W (source) | 250 W (sink) - Fully configurable and operable by means of the supplied software; - Symmetrical input; - Series / parallel connection in case of higher voltage / current requirements; - USB port as series (LAN interface optional); - 2 supply voltages

  • Precision power amplifiers - 4-quadrant voltage and current amplifiers A 1110-05-E

    A 1110-05-E 4-quadrant voltage and current amplifier DC-1 MHz | 100 V/µs | 500 W (source) | 150 W (sink) - Fully configurable and operable by means of the supplied software; - Symmetrical input; - Series / parallel connection in case of higher voltage / current requirements; - USB port as series (LAN interface optional); - 3 supply voltages; - Monitor output voltage / current; - 6 configurable compensation networks for inductive loads in the current amplifier operating mode

  • PRECISION POWER AMPLIFIERS - 4-QUADRANT VOLTAGE AMPLIFIERS - A 1110-16-E

    A 1110-16-E 4-quadrant voltage and current amplifier DC-1 MHz | 100 V/µs | 1000 W (source) | 340 W (sink) Fully configurable and operable by means of the supplied software Symmetrical input; Series / parallel connection in case of higher voltage / current requirements; USB port as series (LAN interface optional); 3 supply voltages; Monitor output voltage / current; 6 configurable compensation networks for inductive loads in the current amplifier operating mode

  • Isolation Amplifiers A 1340-C1

    A 1340-C1 Isolation amplifier DC-1.7 MHz | 20 V/µs | IMRR > 106 dB |500 VAC, 1 kVDC 3-port isolation amplifier (input, output, USB/network) with optionally selectable input and output potentials Input instrument amplifier with high-power common-mode suppression and switchable gain of 1, 2, 5 or 10 Purely analog signal transmission, i.e. output signal free from switching signals Automatic offset compensation is possible at any time at the push of a button

  • AirRobot AR100C

    The AR100-C is the latest development within the AR100 series of flight platforms, adapting all the features from the AR100-B the AR100-C consists of enhanced features including AirRobots unique folding system and a multitude of specialized protective cases and our own on the move backpack making transportation hassle free. The Payloads for the AR100-B can be quickly attached to the AR100-C using AirRobots unique connectors making it easy to continue with the operation and resulting in minimal downtime. Variety of Payloads available including thermal and infra red cameras. The flight time under normal weather conditions is 25 minutes. The AR100-C is ideal for close up inspection applications as it measures at 1 meter in diameter enabling closer observation. We offer rotor blade protection brackets that shield contact with walls and objects.

  • Broadband high-frequency amplifier A1020-25-250

    A 1020-25-250 Broadband high-frequency amplifier 150 kHz - 250 MHz | 25 W Broadband high-frequency amplifier for EMC testing and general laboratory applications; Low-noise operation through high-performance heat sink with temperature-controlled fan; Micro-processor control of all relevant amplifier data; Monitor output.

  • OFFERTA SPECIALE - ATTENUATORE NARDA 745-69

    OFFERTA SPECIALE - ATTENUATORE NARDA 745-69 DC to 18 Ghz € 1790,00 COMPLETO DI 1 ANNO DI GARANZIA

  • AirRobot AR180

    The AR-180 is one of the most universal flight platforms available covering virtually all applications with high performance. Ranging within the 5kg weight class (excluding payload) and adapting fully stabilized HD payloads the AR180 has a flight time of 40 minutes enabling expansion of aerial operations and greater operational control. Complete with reinforced transport cases and a new folding system integrated into the UAS the AR180 can be deployed rapidly and transported safely and securely. The latest development of the AR180 enhances all aspects of operations making operations hassle free and majorly reducing deployment time of the AR180 even further. The ground control station is built into the hand controller with a whole new integrated on screen interface that is user friendly and suits operational needs. Within the interface way points can be plotted and changed in-flight via touch, maps of locations can be downloaded and all data is shown on screen. Simply all the equipment the pilot will need for an operation is the hand controller,battery,payload and flight platform.

  • AirRobot AR200

    The AR200 is the most powerful flight platform in the AirRobot series. With a take-off mass of 10kg (excluding payload)the AR200 is capable of lifting up to a 1.5kg payload and a flight time of 40 minutes.Using the 6 brush-less motor concept the AR200 is able to withstand higher wind speeds with minimal effect on stability. Variety of payloads are available including a brand new development soon to be released into the market. Measuring at 2 meters the AR200 can be transported with ease using the AirRobot unique folding system and specialized cases.

  • Ground control station AR126-41

    AR ground control station (BKS2), digital Incl. digital video recorder, onscreen display, power management, video adapter cable, low voltage cable, (exclusive transmitter and receiver, to be ordered separately) Digital recording in MP4-format on an USB-stick or secondary USB-data carrier device, USB-connector for PC Radio-free connection through a fibre optic cable is available Possible operating time > 5h with one rechargeable-battery

  • AirRobot Base Station T-BKS

    The Base Station is the point of interaction between the mobile units and the human operator. On-screen display and live video image via AirRobot Mission Manager software. More details in the link above.

  • Camera Payload AR180-30

    Camera Payload AR180 / AR200 NL-BL Sony CX410; Recording in AVCHD format („MTS“) on SD data carrier; Resolution: 1,920 x 1,080 Pix (Full HD); 30 x optical zoom

  • Handcontroller TFT-SLR AR126-13

    Handcontroller TFT-SLR. Discription: High-resolution 6,4” (16,25cm) TFT-SLR (sunlight-readable) monitor with dimmable backlight; Live-video and On-screen display (OSD); Propulsion, nick, roll and yaw on two independend Joysticks; Controlling of the payload and waypoints over keypad; For simple using even in the total darkness (red keyboard illumination).

  • Payload Slots for AR150 Block Cameras

    AR180 NL-BL 3 times slot. Slots for up to 3 block cameras of the AR150 payload series

  • SM6000 - Series 6000 W DC Power Supplies

    Features Designed for long life at full power Excellent dynamic responses to load changes Protected against all overload and short circuit conditions Master / Slave parallel and series operation with voltage and current sharing High power system configuration from multiple units 19” rack mounting or laboratory use (feet included) Remote sensing Interlock

  • SM3300 - Series 3300 W DC Power Supplies

    The latest high performance programmable DC power supply from Delta Electronika is able to be operated on single and three phase power sources and is ideally suited to the following applications: Solar inverter testing, PV-simulation Automotive test systems and battery simulations ATE in industrial production lines Plasma chambers and laser applications Controlled battery charging and discharging Driving PWM-controlled DC motors Aerospace and military equipment The Delta SM 3300-Series 3300W programmable DC power supplies are designed for long life at full power. They have excellent dynamic response to load changes and protected against all overload and short circuit conditions.EMC surpasses all CE requirements with low emission & high immunity. They offer low audible noise and the fan is temperature controlled. High voltage isolation up to 1320V

  • SM1500 - Series 1500 W DC Power Supplies

    Delta Elektronika SM1500 Series DC Power Supplies are ideally suited for bench or rack mount applications.The Delta Elektronika SM1500 Series 1500W programmable DC power supplies are designed for long life at full power. They have excellent dynamic response to load changes and protected against all overload and short circuit conditions. EMC surpasses CE requirements: low emission & high immunity. They offer low audible noise: fan is temperature controlled. Available options include High Speed Programming, Extra Isolation, Interface Options, Sequencer, Digital Encoders, Power Sink.

  • SM3000 - Series 3000 W DC Power Supplies

    The Delta Elektronika SM3000 Series Laboratory Power Supply, 19"-rack and bench power supplies. Very high performance, low noise both electrical and audible. The Delta SM 3000-Series 3000W programmable DC power supplies are designed for long life at full power.This high quality power supply is protected against all overload and short circuit conditions Very stable voltage or current 4.10-5 - 10.10-5 EMC: class B for Generic Emission. Can be used safely near sensitive equipment Accurate voltage and current control by 10 turn potentiometers Programmable by Analog voltage, Isolated analog, Ethernet, RS232 or IEEE488 CE High Speed Programming versions available.

  • SM800 - Series 800 W DC Power Supply

    800 W laboratory, bench power supplies, some with two output autoadjusted ranges. The outputs are very stable and accurate and settings can be made either manually of by digital control. The potentiometers can be digital decoders. Very low noise, electrically but also audible. Many features including build-in data interfaces Ethernet, RS232, GPIB, IEEE488. Replaces SM7020D and SM3004D

  • ES 300 Series 300 watts DC Prower Supplies

    The ES300 is a 300 watt DC power source. Voltage ranges are programmable from 0 to 30 volts. Current is programmable from 0 amps to 10 amps.

  • ES 150 Series 150 watts DC Prower Supplies

    Delta Elektonika ES - Series 150W Bench, Programmable System DC power supply Models includeES015-10 0 - 15 V 0 - 10 A ES030-5 0 - 30 V 0 - 5 A ES075-2 0 - 75 V 0 - 2 A ES0300-0.45 0 - 300 V 0 - 450 mA.

  • EST 150 - Series 150W triple output DC Prower Supply

    Compact Triple Output Bench Power Supplies Very low ripple Active Power Factor Control Accurate voltage and current control by 10 turn potentiometers Protected against all overload and short circuit conditions CE

  • MEGOHMMETER M1501P

    Analog or digital solutions, this Insulation Tester is our hi-tech range for cable manufacturers and industry. Product details : insulation and ammeter measurement; temperature and humidity measurement (option); resistance measurement per km for cable testing; Measurement storage - up to 512 measurements can be stored into internal memory (option); reversible polarity; dedicated for laboratory, cable tester manufacturers, SIR (Surface Insulation Resistance) test can be done through ISOSCAN software coupled with a switching matrix; IEEE488-2 model

  • MEGOHMMETER M1501M

    Our digital Insulation Tester is our hi-tech range for cable manufacturers and industry. Product details : insulation and ammeter measurement; temperature and humidity measurement (option); resistance measurement per km for measuring cables on reel; Measurement storage - up to 512 measurements can be stored into internal memory (option); reversible polarity; dedicated for laboratory, cable tester manufacturers; SIR (Surface Insulation Resistance) test can be done through ISOSCAN software coupled with a switching matrix

  • MEGOHMMETER M1501U

    Our digital Insulation Tester is our hi-tech range for cable manufacturers and industry. This U version, is a derivated product from the M1500M, but much cheaper (with limited specs). Product details: insulation and ammeter measurement; temperature and humidity measurement (option); resistance measurement per km for measuring cables on reel ; reversible polarity; dedicated for laboratory, cable tester manufacturers;SIR (Surface Insulation Resistance) test can be done through ISOSCAN software coupled with a switching matrix

  • MEGOHMMETER MXS1000

    The MXS1000 is a megohmmeter / teraohmmeter with a high accuracy, dedicated as well for test laboratories as for production line thanks to his ethernet interfaces and fast communication. Product details : Insulation resistance from 50kO up to 200 GO (2 TO in option); DC voltage up to 1000 VDC (1 V steps); 50 parameter sets storage; Built in RS232C interface and good/bad contact; ETHERNET, PLC or IEEE488-2 interfaces in option; SXSPro software available in english, french, spanish and german ? resistance measurement per km for test on cables (option XS-22); dedicated for laboratory and production lines; complies with the following safety testing standards : IEC1010, IEC335, IEC598, IEC601, IEC950, and many other standards

  • MEGOHMMETER MXS500

    The MXS500 is a megohmmeter / teraohmmeter with a high accuracy, dedicated as well for test laboratories as for production line thanks to his ethernet interfaces and fast communication Product details: Insulation resistance from 50kO up to 200 GO (2 TO in option); DC voltage from 10 V up to 500 VDC (1 V steps); 50 parameter sets storage; Built in RS232C interface and good/bad contact; ETHERNET, PLC or IEEE488-2 interfaces in option; SXSPro software available in english, french, spanish and german resistance measurement per km for test on cables (option XS-22); dedicated for laboratory and production lines; complies with the following safety testing standards : IEC1010, IEC335, IEC598, IEC601, IEC950, and many other standards

  • Synor Cable Tester Range

    SYNOR CABLE TESTER RANGE IS AN ATE (AUTOMATIC TEST EQUIPMENT) DEDICATED FOR TESTING ELECTRICAL WIRING HARNESSES, BACKPLANES OR CABLES

  • Safety Cage

    A SAFETY CAGE IS NECESSARY WHEN YOU WANT TO REALIZE DIELECTRIC STRENGTH TEST ON SMALL SUB-ASSEMBLIES WITH THE HIGHEST LEVEL OF SAFETY. ASSOCIATE OUR SAFETY CAGES WITH OUR DIELECTRIC STRENGTH TESTER, DIELECTRIMETER OR MEGOHMMETER IN ORDER TO REALIZE YOUR TEST AND PREVENT THE USER FROM HIGH VOLTAGE DANGERS

  • Switching Matrix

    A SWITCHING MATRIX IS A SCANNER (RELAYS) DEDICATED TO AUTOMATE A TEST PROCESS. IT ALLOWS YOU TO AUTOMATICALLY TEST SEVERAL PRODUCTS AT THE SAME TIME, OR SEVERAL POINTS OF A DEVICE UNDER TEST. OUR MATRIXES ARE ORGANIZED INTO MODULES (MODULO 4) IN ORDER TO GIVE YOU A GREAT FLEXIBILITY. EITHER YOU CAN DRIVE OUR SYSTEM OR OUR SOFTWARE SOLUTION CAN. APPLICATION WHEN SEVERAL HIGH VOLTAGE OR GROUND BOND TEST POINTS ARE NEEDED, IT BECOMES INTERESTING TO AUTOMATE THE TEST PROCESS FOR SAVING TIME AND MONEY, SECURING THE TESTING, AND TRACE ALL RESULTS. OUR MATRIXES ARE DEDICATED FOR THAT JOB.

  • Maia 100

    La stampante 3D maia100, versione “entry level” della serie desktop, primeggia per la sua compattezza privileggiando l’installazione su scrivanie e piani di lavoro. La maia100 è dotata di un estrusore di stampa che permette l’utilizzo di un unico colore per volta o, in alternativa, grazie all’accessorio Plus acquistabile separatamente aggiungere un secondo colore o l’utilizzo di materiale di supporto. Le caratteristiche di stampa sono tipiche dei prodotti di fascia alta, le guide, tutte composte da madreviti precaricate garantiscono una precisione di ripetitività pari allo 0,02 mm per m garantendo modelli dalla fedeltà unica, anche nei dettagli più piccoli. I fi lamenti adottati dalla stampante 3D maia100Pro sono frutto di una ricerca meticolosa nel settore dei tecnopolimeri, è per questo motivo che, tutti i fi lamenti, disponibili nelle dimensioni da 1,75 mm e 3,00 mm, sono forniti in apposite bobine sigillate certifi cate a garantite da 3dmaker printers.

  • Maia100Pro

    La stampante 3D maia100Pro, è una stampante di tipo desktop, grazie alla sua compattezza, è un oggetto facilmente posizionabile su una scrivania e comunque in un ambiente di lavoro dinamico. La maia100Pro è dotata di due estrusori di stampa che permettono l’utilizzo combinato o di un unico colore per volta più materiale di supporto, o di due colori contemporaneamente per stampe a due colori o, in alternativa, grazie all’accessorio Plus acquistabile separatamente aggiungere un secondo colore contemporaneamente all’utilizzo di materiale di supporto. Le caratteristiche di stampa sono tipiche dei prodotti di fascia alta, le guide, tutte composte da madreviti precaricate garantiscono una precisione di ripetitività pari allo 0,02 mm per m garantendo modelli dalla fedeltà unica, anche nei dettagli più piccoli.

  • MAIA 300

    La stampante 3D maia300, versione “entry level” della serie 300 è un prodotto semplice ma dalle grandi prestazioni, ha una sola testina di stampa che permette l’utilizzo di un unico colore o materiale. Come gli altri prodotti della sua categoria è stata progettata e realizzata con l’obiettivo di realizzare modelli che sapranno sbalordire anche nei più piccoli dettagli, ciò grazie anche alle guide, tutte composte da madreviti precaricate che garantiscono una precisione di ripetitività pari allo 0,02 mm per m per modelli dalla fedeltà unica, anche nei dettagli più piccoli.La stampante 3D maia300, ha un carter interamente realizzato in metallo per garantire al prodotto una maggiore robustezza il tutto in dimensioni ridotte che ne fanno senza alcun problema un ottimo sistema di prototipazione rapido da ufficio.

  • Maia 300Pro

    La stampante 3D maia300Pro, derivata dalla 300, grazie alla sua configurazione permette l’utilizzo contemporaneo di un colore più materiale di supporto, o due colori contemporaneamente non miscibili o in alternativa due materiali diversi.Le configurazioni possibili, la struttura, robusta ed elegante, ed il software ne fanno un prodotto importante e distintivo in uno studio di prototipazione.

  • Maia 300Pro2

    La stampante 3D maia300Pro2, è una stampante dalle grandi prestazioni. Le sue caratteristiche sono quelle tipiche dei prodotti di fascia alta, grazie alle guide, tutte composte da madreviti precaricate che garantiscono una precisione di ripetitività pari allo 0,02 mm per m per modelli dalla fedeltà unica, anche nei dettagli più piccoli.La stampante 3D maia300Pro2, ha un aspetto semplice ma allo stesso tempo elegante, con carter interamente realizzato in metallo per garantire al prodotto una maggiore robustezza il tutto in dimensioni ridotte che ne fanno senza alcun problema un ottimo sistema di prototipazione rapido da ufficio.

  • Maia 500

    La stampante 3D maia500Pro2, è una stampante dedicanta a chi ha nacessità di produrre prodotti dalle dimensioni importanti per altezza, infatti, grazie all’innovativo sistema “high elevation” essa può raggiungere i 500 mm. Dotata inoltre di tre cassetti permette una personalizzazione unica nel suo genere, infatti è possibili adottare una combinazione di due colori più materiale di supporto, tre colori senza materiale di supporto, due materiali diversi per caratteristiche fisico-meccaniche più materiale di supporto o tre materiali diversi sempre per caratteristiche fisico-meccaniche. Tutto ciò grazie al software makerdesign che scelto il contenuto dei cassetti setta in automatico la modalità di estrusione di ogni prodotto al fine di garantire stampe mozzafiato.

  • Maia 500Pro

    La stampante 3D maia500Pro, è una stampante dedicanta a chi ha nacessità di produrre prodotti dalle dimensioni importanti per altezza, infatti, grazie all’innovativo sistema “high elevation” può raggiungere i 500 mm. Dotata inoltre di tre cassetti permette una personalizzazione unica nel suo genere, infatti è possibili adottare una combinazione di due colori più materiale di supporto, tre colori senza materiale di supporto, due materiali diversi per caratteristiche fisico-meccaniche più materiale di supporto o tre materiali diversi sempre per caratteristiche fisico-meccaniche, il tutto grazie al software makerdesign che scelto il contenuto dei cassetti setta in automatico la modalità di estrusione di ogni prodotto al fine di garantire stampe mozzafiato.

  • Maia 500Pro2

    La stampante 3D maia500Pro2, è una stampante dedicanta a chi ha nacessità di produrre prodotti dalle dimensioni importanti per altezza, infatti, grazie all’innovativo sistema “high elevation” può raggiungere i 500 mm. Dotata inoltre di tre cassetti permette una personalizzazione unica nel suo genere, infatti è possibili adottare una combinazione di due colori più materiale di supporto, tre colori senza materiale di supporto, due materiali diversi per caratteristiche fisico-meccaniche più materiale di supporto o tre materiali diversi sempre per caratteristiche fisico-meccaniche, il tutto grazie al software makerdesign che scelto il contenuto dei cassetti setta in automatico la modalità di estrusione di ogni prodotto al fine di garantire stampe mozzafiato.

  • Maia 700Pro

    La stampante 3D maia700Pro, è una stampante dai volumi di stampa importanti, le sue dimensioni se pur compatte permettono di stampare volumi dalle dimensioni in pianta pari a 450 x 450 mm. Come quelle serie 500, anch’essa è dotata inoltre di tre cassetti permette una personalizzazione unica nel suo genere, infatti è possibili adottare una combinazione di due colori più materiale di supporto, tre colori senza materiale di supporto, due materiali diversi per caratteristiche fisico-meccaniche più materiale di supporto o tre materiali diversi sempre per caratteristiche fisico-meccaniche, il tutto grazie al software makerdesign che scelto il contenuto dei cassetti setta in automatico la modalità di estrusione di ogni prodotto al fine di garantire stampe mozzafiato.

  • Maia 700Pro2

    La stampante 3D maia700Pro, è una stampante dai volumi di stampa importanti, le sue dimensioni se pur compatte permettono di stampare volumi dalle dimensioni in pianta pari a 450 x 450 mm. Come quelle serie 500, anch’essa è dotata inoltre di tre cassetti permette una personalizzazione unica nel suo genere, infatti è possibili adottare una combinazione di due colori più materiale di supporto, tre colori senza materiale di supporto, due materiali diversi per caratteristiche fisico-meccaniche più materiale di supporto o tre materiali diversi sempre per caratteristiche fisico-meccaniche, il tutto grazie al software makerdesign che scelto il contenuto dei cassetti setta in automatico la modalità di estrusione di ogni prodotto al fine di garantire stampe mozzafiato.

  • ROBOT VOLANTE DIDATTICO “APIS TRAINER”

    “APIS Trainer” è una famiglia di robot volanti concepita per un uso didattico, e viene offerta in kit orientati a diverse discipline, come la meccatronica, l’informatica e l’aeronautica. La famiglia APIS incorpora tutti i meccanismi di sicurezza (safety) richiesti dalle recenti normative ENAC, come, ad esempio, l’atterraggio automatico in caso di assenza di segnale GPS, l’atterraggio in caso di superamento della zona predefinita di “geofence”, il controllo di emergenza dissimilare (un radiocomando esterno consente di controllare il mezzo aereo da parte di un pilota, pronto a prenderne il controllo in caso di necessità).

  • Termocamera FLIR TAU 2

    FLIR® Tau® 2 thermal imaging cameras offer an unmatched set of features, making them well-suited for demanding applications like Unmanned Airborne Vehicles (UAVs), thermal weapon sights, and handheld imagers. Improved electronics now give Tau 2 even more capabilities, including radiometry, increased sensitivity (<30mK), 640/60Hz frame rates, and powerful image processing modes that dramatically improve detail and contrast. Since the electrical function are common between the Tau 2 640, 336 and 324, integrators have direct compatibility between the different camera formats, and Tau camera versions share many of the same lens options.

  • 3310F SERIES DC Electronic Load

    3310F DC Electronic Load 60V, 30A, 150W more3311F DC Electronic Load 60V, 60A , 300W more3312F DC Electronic Load 250V,12A,300W more3314F DC Electronic Load 500V,12A,300W more3315F DC Electronic Load 60V,15A,75W

  • KIMO PRODUCTS

  • Prodigit 3340G Series

    3341G LED DC Electronic Load Simulator 300V, 24A, 300W 3342G LED DC Electronic Load Simulator 500V, 12A, 300W 3343G LED DC Electronic Load Simulator 500V, 24A, 300W 33401G LED DC Electronic Load Simulator 500V, 6A, 150Wx2

  • 3300 SERIES Eletronic Load Mainframe

    3302C Single Channel Mainframe more3302C-01 Single Channel Mainframe (with GPIB Interface) more3300C Four Channel Mainframe more3300C-01 Four Channel Mainframe (with GPIB Interface) more3301A Four Channel Mainframe (with GPIB Interface, Listen Only) more3301A-01 Four Channel Mainframe more3300F Four Channel Mainframe more3305F Two Channel Mainframe more3302F Single Channel Mainframe

  • elektro automatik

    The Complete Power Supply Range?
    EA offers a large variety of power-supply products for laboratories, industries and vocational training. EA-Power supplies are optimized  to make best use of the available energy and have an overall efficiency above average.?

    * Laboratory power supplies, industrial power supplies, with flexible auto-ranging output?
    * Electronics loads (even with recovery function) and inverters?
    * Built-in, Din rail, 19“ format power supplies ??Research is the basis for our visions for the future

    ?At EA, research and development have the highest significance. Our power-supply products meet or exceed the latest technological standard.  All relevant EMC and safety-compliance tests are done in our in-house laboratories?

    Tailor-made: Fast and efficient
    ?Direct and fast communication is our strength. Our customers value the fast and straight contact, enabling us to cater for their wishes and requirements in the most effective manner. What has just come up us an idea today, is under design tomorrow and completed the day after tomorrow.

  • Certificato ISO9001

    Image and video hosting by TinyPic

  • FAB Totum

    The FABtotum is a multipurpose tool, the world's first Low Cost Desktop Personal Fabrication device that can operate a wide range of computer controlled manufacturing (CNC) and 3D-scanning processes. Print, Cut, Mill, Scan, Manipulate. Rinse and repeat! A seamless interaction between the physical and the digital world. While current 3D printers are defined as personal fabricators, there is so much more to personal fabrication than 3D printing alone! The FABtotum allows anyone to explore the endless possibilities of a multipurpose fabrication device.

  • PWR100 Power Integrity Station

    PWR100 Power Integrity Station

    Features & Benefits:

    • Full Featured VNA measures low frequency PDN impedance
      (up to 40MHZ)
    • Specialized Signal and EMI Probes make loadstep and impedance
      testing easier
    • Specialized Injectors enable power supply measurements
    • New Harmonic Injector Supercharges your Spectrum Analyzer

    PI STATION BUNDLE INCLUDES:

    • OMICRON Lab Bode 100 Vector Network Analyzer
    • 1-Port and 2-Port 1 GHz 50 ohm Tranmission Line PDN Probes
    • Signal Injectors and Impedance Adapters
    • EMI Bundle with Low Noise Amplifier
    • Harmonic Comb Injector
    • High Performance Cable and Connector Kit
    • Power Integrity Training: VRTS3 Kit and Power Integrity Text Book

    MODEL

    DESCRIPTION

    PWR100

    POWER INTEGRITY STATION

    PWR100

    POEWR INTEGRITY STATION BUNDLE ( DOES NOT INCLUDE THE BODE FORCUSTOMERS THAT ALREADY HAVE THE BODE 100 VNA)

    ICLUDES

    DESCRIPTION

    OL000100

    BODE 100 VECTOR NETWORK ANALYZER

    INJB03

    INJB03 INJECTOR BUNDLE#3 (INCLUDES J2111A CURRENT INIECTOR, J2101 INJECTON TRASFORMER 10Hz- 45MHz, J2120 LINE INJECTOR, J2140 ATTENUATOR, J2170 HIGH PSRR POWER ADAPTER, USER MANUEL, 1 YEAR WARRANTY

    P21B01

    PDN PROBE BUNDLE, ACCESSORY KIT TWO P2130A DC BLOCKERS

    OL000152/OL000153

    B-SMC AND B-WIC INPENDANCE ADAPTERS

    EMIB01

    EMI PROBES/ J2180A AMPLIFIER BUDLE

    J2150A

    HARMONIC COMB INJECTOR

    CBL001

    HIGH PERFORMANCE CABLECONNECTOR KIT

    TRN001

    VRTS3 DISTRIBUTED SYSTEM DEMO BOARD, POWER INTEGRITY TEXT BOOK

  • MR 160

    FLIR MR160
    Imaging Moisture Meter

    The FLIR MR160 Imaging Moisture Meter is the first of its kind. Equipped with a built-in thermal camera, MR160 is the only moisture meter with the power to show you exactly where to measure.
    Featuring Infrared Guided Measurement (IGM™) technology, the MR160 helps you quickly scan and target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings.
    An integrated pinless sensor and an external pin probe provide the
    flexibility to take either intrusive or non-intrusive measurements. Built tough with an industry-leading warranty, the MR160 can serve as your go-to troubleshooting tool right out of the box – or as the perfect complement to any high resolution thermal camera you already
    own – helping you find hidden moisture issues and capture reliable
    data more efficiently.

    IDENTIFY AND VERIFY WITH ONE TOOL.

    First-ever thermal imaging moisture meter
    • 80 x 60 Lepton® thermal imager powers IGM technology
    • Document thermal images and moisture readings on one screen
    • Review images and generate reports with free FLIR Tools software

    TROUBLESHOOT QUICKLY.

    Easily investigate insulation and moisture issues
    • Pinless technology for fast non-intrusive measurements
    • External pin probe included for contact moisture measurements
    • Easy targeting with laser pointer and display cross-hairs

    PORTABLE, TOUGH AND DURABLE.

    Drop tested rugged design
    • Industry-leading warranty
    • Small form factor to conveniently carry with you
    • Internal rechargeable battery with USB

    Specifications

    FLIR MR160: Imaging Moisture Meter

    Thermal imaging detector

    FLIR Lepton® microbolometer

    Image Calibration

    Automatic

    Thermal image resolution (W × H)

    4800 pixels (80 × 60)

    Spectral response

    8–14µm

    Field of view (W x H)

    51° × 38°

    Thermal sensitivity

    <0.15°C

    Image frame rate

    9 Hz

    Image Display

    Color moisture alert

    Minimum focus distance

    10cm (4")

    Moisture Measurement

    Pin moisture via external probe range (accuracy)

    0–100% WME (± 5%)

    Pin moisture groups

    9 material groups

    Pinless moisture range

    0–100 relative measurement

    Pinless Measurement Depth

    0.75" (19mm) Max

    Measurement resolution

    0.1

    Response time pinless

    100ms

    Response time pin mode

    750ms

    General information

    Display (W x H)

    QVGA (320 x 240 pixel) 2.3” 64k color TFT

    Saved image file format

    BMP with measurement values overlaid

    Stored image capacity

    9999 images

    Laser orientation

    Single laser pointer to center of thermal image

    Power requirements

    Integrated rechargable battery

    Battery power - continuous run time

    18 hours max

    Battery power - typical usage

    4 work weeks*

    Battery

    3.7 V, 3000 mAh Li-ion rechargeable via micro USB

    Drop Test

    9.8’ (3m)

    Certification standards

    EN61326 (EMC), EN61010 (battery + charger), EN60825-1 class 2 (Laser)

    Agency approvals

    FCC class B, CE, UL

    Warranty

    2 Yr Product, 10 Yr Thermal detector**

  • TecQuipment TORQUE AUTUMN 2015

  • TV900 MANTIDE

  • TV650 GEKO

  • TV330 APIS

  • Fluke i2500-10 Sonda di corrente flessibile 2500A 25cm

    SONDA DI CORRENTE I2500-10 IFLEX: FLESSIBILITÀ DI MISURA SENZA PRECEDENTI

    La nuova sonda di corrente flessibile Fluke iFlex™ espande la gamma di alcuni misuratori Fluke fino a 2.500 A AC, garantendo al contempo una flessibilità di misura estrema. Le sonda di corrente iFlex™ possono essere connesse direttamente al multimetro e consentono di visualizzare le misure di corrente senza il ricorso a fattori di scala, che sono soggetti a errori. Il cavo da 1,8m consente la separazione tra la posizione di misura e il multimetro a pinza, facilitando così la lettura del display. Le grandi dimensioni del toroide e la sezione trasversale sottile consentono di effettuare misure di conduttori di dimensioni non standard e migliorano l’accesso a spazi angusti. Disponibile in misure da 25 cm e 45 cm.

     

    CARATTERISTICHE

     

    • 2.500 A AC per misure di corrente con alcuni multimetri Fluke
    • Funziona con le funzionalità di frequenza, corrente di spunto e valore min/max di alcuni multimetri
    • Espande la gamma di misura fi no a 2.500 A AC e consente una maggiore flessibilità di visualizzazione, permette di misurare conduttori di dimensioni non standard e migliora l’accesso al cablaggio
    • Classe di sicurezza CAT IV 600 V, CAT III 1000 V
    • Il diametro della bobina di 7,5 mm consente di eseguire misure negli spazi più angusti
    • Cavo da 1,8 m (6 ft)
    • Garanzia di tre anni

  • Fluke 124 Oscilloscopio Industriale ScopeMeter 40MHz

    L'Oscilloscopio Fluke 124 è la soluzione ideale per la ricerca guasti nelle applicazioni industriali e delle installazioni.

    Lo ScopeMeter 124 è uno strumento di misura completamente integrato, che racchiude in un unico, affidabile prodotto di facile utilizzo un oscilloscopio, un multimetro ed un registratore "senza carta".

    Risolve con rapidità i problemi che possono verificarsi nei macchinari, nelle strumentazioni e nei sistemi di controllo ed alimentazione.

  • Fluke 1587 - Multimetro con tester di isolamento fino a 1000 Volt

    FLUKE 1587 - Due potenti strumenti in uno Il multimetro Fluke 1587 per test di isolamento è stato progettatato per testare motori, generatori, cavi o gruppi di comando con le prestazioni di multimetro digitale TRMS e un tester di isolamento fino 1000 Volt ma a un costo molto inferiore rispetto all'acquisto dei due singoli strumenti.

  • Fluke 1730 Registratore Energia Trifase

     

    Progettato appositamente per utenti interessati al risparmio energetico, l'analizzatore del consumo energetico trifase Fluke 1730 introduce un modo nuovo e semplice di individuare gli sprechi energetici. La profilazione dell'uso di energia nell'impianto aiuta a identificare le opportunità di risparmio energetico e fornisce dati intuitivi, necessari per operare nel modo corretto.

  • Fluke 323 Multimetro a pinza AC 400A/600V

    Le misure a vero valore  RMS e le caratteristiche ergonomiche ottimizzate rendono i multimetri a pinza Serie 320 i migliori strumenti di ricerca guasti generica per gli elettricisti del settore commerciale e residenziale. Il modello Fluke 323 è l'ideale per misure di corrente fino a 400 A in alloggiamenti cavi stretti.

    Capacità di misura

    • Misura di corrente 400 A AC
    • 600 V per misure di tensione AC e DC
    • Corrente e tensione AC a vero valore RMS per misure accurate dei segnali non lineari
    • Misura della resistenza fino a 40 kO con rilevamento di continuità


    Caratteristiche

    • Design sottile ed ergonomico
    • Classe di sicurezza CAT IV 300 V/CAT III 600 V
    • Pulsante Hold
    • Due anni di garanzia
    • Borsa morbida per il trasporto

  • Fluke 707 Calibratore di Loop 4-20mA

    Lo strumento che consente di eseguire controlli di loop rapidi e con una sola mano. Basta un "click"

    Questa soluzione ricca di funzioni unisce le migliori caratteristiche dei calibratori di loop con pulsante e manopola e offre:

    • Ampio display ed interfaccia semplice e rapida per consentire un agevole utilizzo con una sola mano.
    • Letture di mA e % simultanee per una rapida e facile interpretazione delle misure.
    • Risoluzione di 1 µA per la generazione, simulazione e misura di mA.
    • Pulsante con intervalli del 25% per controlli di linearità rapidi ed agevoli.
    • “Span check” 0-100% per una conferma rapida dello zero e dell’intervallo.
    • Funzioni di rampa lenta, veloce e step selezionabili, per fornire delle uscite attenuate per il controllo dell'apertura delle valvole e i test funzionali di loop.
    • Alimentazione interna a 24 volt, per poter alimentare e leggere un trasmettitore nello stesso momento senza dover portare un multimetro digitale.
    • Misura la tensione dc fino a 28 V.
    • Un sola batteria da 9V, facile da sostituire senza dover rompere il sigillo di calibrazione
    • Funzionamento di default all'accensione 0 - 20 mA o 4 - 20 mA.
    • Innovativo selettore di regolazione delle uscite con una risoluzione di 100 e 1 µA.
    • La modalità HART ™ consente di collegare in serie un resistore da 250 O con loop a 24 V per la compatibilità con i dispositivi di comunicazione HART.

  • Fluke 717 30G Calibratore di Pressione

    Panoramica delle funzioni

     

    • Misura della pressione, 0,05% del fondo scala con sensore interno, fino a 30 psi
    • Misura mA con precisione dello 0,15%, risoluzione di 0,001 mA e alimentazione loop da 24 V.
    • Misura della pressione a 10.000 psi/700 bar, utilizzando uno dei 29 moduli di 29 Fluke 700Pxx
    • Connettore di pressione femmina 1/8 NPT
    • Compatibilità con gas e liquidi non corrosivi
    • Selezione di undici unità tecniche diverse
    • Funzioni Zero, Min, Max e Hold
    • Calibrazione di strumenti P/I con misura simultanea di pressione e corrente
    • Funzione di prova pressostato in grado di rilevare impostazioni, ripristino e valori della zona morta di un pressostato
    • Calcolo della % di errore delle misure mA per una rapida decisione di esecuzione del test passa/non passa
    • Lunga durata delle batterie
    • Guscio protettivo con scomparto per puntali
    • Compatibile con il sistema di aggancio magnetico ToolPack
    • Nuova funzione di prova del pressostato


    PRESSIONE

    • Precisione: 0,05% del fondo scala
    • Funzioni: Zero, Min, Max, Hold, Damp
    • Gamma: Da -12 a 30 psi, (da -850 mbar a 2 bar; da -83 a 206,84 kPa)
    • Risoluzione: 0,001 psi, 0,1 mbar, 0,01 kPa
    • Sovrapressione: 2 X fondo scala

     

    CORRENTE

    • Gamma: Da 0 a 24 mA (da -25% a 125%)
    • Risoluzione: 0,001 mA
    • Precisione: 0,015% + 2 punti


    ALIMENTAZIONE LOOP

    • Gamma: 24 V cc
    • Precisione: +/- 10%
    • Nota: alimentazione 20 mA in 1000 ohm per batteria > 6,8 V; 700 W per batteria da 5,8 a 6,8 V

     

    SPECIFICHE

    • Specifiche di sicurezza: CSA C22.2 n. 1010.1:1992
    • Dimensioni: 201 mm x 98 mm x 52 mm (L x A x P)
    • Peso: circa 600 g con guscio
    • Garanzia: 3 anni
    • Urti e vibrazioni: Casuale, 2G, 5-500 Hz
    • Test di caduta: 1 m
    • Tipo di batterie: Batteria alcalina singola da 9 V ANSI/NEDA 1604A o IEC 6LR619V 

  • Fluke 9040 rilevatore senso ciclico delle fasi

    Il Fluke 9040 è lo strumento efficace per i test di rotazione delle fasi nei settori in cui motori, comandi e sistemi elettrici hanno un'alimentazione trifase. Fluke 9040 è un indicatore di campo di rotazione che visualizza chiaramente su un display LCD il valore dell'alimentazione trifase e la direzione di rotazione delle fasi per la determinazione dei corretti collegamenti. Lo strumento determina rapidamente la sequenza delle fasi e offre una gamma di tensioni (fino a 700 V) e di frequenze appropriata per le applicazioni commerciali ed industriali. Le sonde di test in dotazione offrono una chiusura variabile che consente contatti sicuri, anche nel caso di prese industriali.

     

    Caratteristiche:

    • Indicazione trifase
    • Indicazione di rotazione delle fasi
    • Display LCD nitido
    • Non richiede batterie

  • Fluke 9062 Indicatore senso ciclico delle fasi e rotazione

    Fluke 9062 è l'unico strumento che fornisce un'indicazione sul senso di rotazione delle fasi e dei motori, con il vantaggio di rilevazione senza contatto.

    Ideato appositamente per gli ambienti commerciali e industriali, fornisce una rapida indicazione della rotazione trifase mediante l'utilizzo dei cavi di test in dotazione. Inoltre è possibile utilizzarlo per determinare la rotazione nei motori trifase sincroni e asincroni.

    La rilevazione senza contatto è ideale per motori in cui l'albero non è visibile.

    Le sonde di test in dotazione offrono una chiusura variabile che consente contatti sicuri, anche nel caso di prese industriali.


    Caratteristiche:

    • Indicazione trifase
    • Indicazione di rotazione di fase
    • Indicazione della direzione di rotazione dei motori
    • Determinazione senza contatto della direzione di rotazione dei motori durante il loro funzionamento

  • Fluke A3000 Modulo Pinza Amperometrica AC Wireless

    Il modulo per pinze amperometriche CA wireless FC a3000 Fluke è un misuratore con pinze amperometriche a vero valore RMS completamente funzionale che trasmette in modalità wireless i dati di altre unità master abilitate con Fluke Connect™, qui di seguito elencate:

    • Multimetro digitale FC 3000 Fluke
    • Termocamera a infrarossi Fluke Ti200/300/400
    • PC tramite adattatore FC pc3000 opzionale
    • Applicazione mobile Fluke Connect

    Il modulo per pinze amperometriche CA wireless FC Fluke 3000 con applicazione ha tutto il necessario per eseguire una ricerca guasti e misurazioni convenienti:

    • Multimetro a pinza CA a vero valore RMS
    • Misurazioni fino a 400 A CA
    • Utilizzo separato o come parte del sistema
    • Funzione di registrazione per memorizzare e salvare fino a 65.000 misure
    • Funzione corrente di spunto

  • Fluke A3001 Modulo di Corrente AC iFlex™ Wireless

    Il modulo corrente CA iFlex wireless FC a3000 Fluke è un misuratore con pinze amperometriche a vero valore RMS completamente funzionale che trasmette in modalità wireless i dati di altre unità master abilitate con Fluke Connect™, qui di seguito elencate:

    • Multimetro digitale 3000 FC Fluke
    • Termocamera Fluke Ti200/300/400
    • PC tramite adattatore FC pc3000 opzionale
    • Applicazione mobile Fluke Connect

    Il modulo corrente wireless iFlex™ consente di effettuare misure intorno a conduttori di dimensioni atipiche o in spazi ristretti, facilitando l'accesso ai fili:

    • Misurazioni fino a 2500 A CA
    • Utilizzo separato o come parte del sistema
    • Funzione di registrazione per memorizzare e salvare fino a 65.000 misure
    • Funzione corrente di spunto
    • Cinghia con aggancio magnetico

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129